MultiStorage Device Installation and Service Guide
Table Of Contents
- Contents
- Figures
- About this guide
- Summary of changes
- Chapter 1. Introduction
- Chapter 2. Disassembling the 4810/4910 SurePOS 300
- Chapter 3. Problem determination
- Chapter 4. Parts catalog
- Appendix A. Input/output device commands
- Character display (VFD) commands
- Emulation mode select (00)
- Character set select (02)
- User character definition (03)
- Brightness control (04)
- Alphanumeric message scroll (05)
- Backspace (08)
- Horizontal tab (09)
- Line feed (0A)
- Carriage return (0D)
- Test (0F)
- Display position (10)
- Normal-display control mode (11)
- Vertical-scroll display control mode (12)
- Cursor on (13)
- Cursor off (14)
- Reset (1F)
- Null VFD Commands
- Emulation mode select (00)
- APA commands
- Character display (VFD) commands
- Appendix B. Notices
- Appendix C. Safety information
- Index
- Readers’ Comments — We'd Like to Hear from You
v When message data is changed, you must reissue this command. While
scrolling, the User Definable Font Set command is not available.
v Space data is written in the other rows except those selected with the Pl
code.
Font selection
1B 53 Pn
Purpose:
Selects the language font to use
The command stream is as follows:
Pn 30: English - IBM code page 437 modified (default)
31: Japanese - JIS X 0208-1990
32: Korean - KS C 5601-1992
33: Simplified Chinese - GB-2321
34: Traditional Chinese - BIG5
Null Commands
(06), (1B, 06), (07), (1B, 07)
Purpose:
These are null commands for both integrated and distributed display
modules. They have no effect on the operation of the display.
Input/output device commands
11-9-2005
A-16 SurePOS Installation and Service