Operation Manual

When installing:

v Make sure that the connector 5 is firmly attached.

v Plug the gray antenna cable into jack J1, or MAIN, or M,

and the black antenna cable into jack J2, or AUX, or A.

v With the notched end of the card toward the socket,

insert the card into the socket, and then press it firmly.

Pivot the card until it snaps into place. Make sure that

the card is firmly fixed in the slot and does not move

easily.

Cable routing for the 802.11b/modem combo card

When attaching the Mini PCI adapter, route the antenna

cables to go under the cable guide as in a, and if the

antenna cable has the tab, place the each tab as indicated

by arrow b in this figure.

Removing and replacing a FRU

88 MT 2672, 2673, 2884, 2885