Operation Manual

Bluetooth/Modem daughter card (BMDC or
BMDC-3)
2
3
Note: In step 3, if the antenna jack has a tab marked
“BT” , unplug the jack by pulling the tab with your
fingers. If the antenna jack does not have the tab,
unplug the jack by using the removal tool antenna
RF connector (P/N: 08K7159) or pick the connector
with your fingers and gently unplug it in direction of
the arrow.
3
When installing:
1. Plug the white cable into the jack on the card.
2. Make sure that the connectors 2 and 3 are
attached firmly.
Removing and replacing a FRU
102 MT 2672, 2673, 2884, 2885