Inside cover These user’s setup instructions cover typical user environments. The on-screen messages may differ depending on the level of your hardware and software. In some cases you may need to vary the setup procedures. For more information, refer to your computer or operating system manuals or consult your system administrator or dealer. Ces instructions de configuration d’exploitation s’appliquent aux environnements d’utilisation types.
DANGER To avoid electric shock hazard: • The product is supplied with a grounded plug and power cord which should be used to connect to the AC supply. • The power cord should only be used with a properly wired and grounded power outlet. • Any equipment to which this product is attached must also be connected to a properly wired and grounded outlet. • Do not remove the covers. • The product does not incorporate an AC power switch.
Manipulation : • Manipuler ce produit avec précaution pour le déplacer. • Le panneau ne doit pas être utilisé en position horizontale. • La lampe fluorescente de l’écran à cristaux liquides contient une faible quantité de mercure (moins de 50 milligrammes). Pour protéger l’environnement, ce produit ne doit pas être jeté dans une décharge. Il doit être éliminé conformément aux réglementations locales. • L’écran à cristaux liquides est en verre.
GEVAAR Voor het vermijden van elektrische schokken: • Dit product wordt geleverd met een voedingskabel voorzien van een geaarde stekker. Voor aansluiting op het lichtnet dient deze voedingskabel gebruikt te worden. • De voedingskabel dient alleen gebruikt te worden in een stopcontact dat correct bedraad en geaard is. • Alle apparatuur waar dit product op aangesloten is dient eveneens op een correct bedraad en geaard stopcontact aangesloten te zijn. • Demonteer niet de dekplaten.
Manipulación: • Al mover el producto, hágalo con cuidado. • El panel no debe ponerse en funcionamiento si se encuentra en posición horizontal. • La lámpara fluorescente que se utiliza en la pantalla de cristal líquido (LCD) contiene una pequeña cantidad de mercurio (menos de 50 miligramos). No lo tire junto a basuras que se depositan en vertederos; hacerlo, podría resultar nocivo para el medio ambiente. Tenga en cuenta la normativa local en cuanto a eliminación de desechos.
PERIGO Para evitar o perigo de choques eléctricos: • O produto é fornecido com uma ficha com massa e um cabo eléctrico que deverá ser utilizado para ligar à alimentação CA. • O cabo eléctrico deve ser apenas utilizado com uma tomada devidamente electrificada e ligada à massa. • Qualquer equipamento a que este produto se encontre ligado também tem que estar ligado a uma tomada devidamente electrificada e ligada à massa. • Não tire as coberturas. • O produto não possui um interruptor CA.
Håndtering: • Behandl produktet forsigtigt, når det flyttes. • Panelet må ikke betjenes i vandret stilling. • Den fluorescerede pære i LCD-skærmen indeholder et mindre kvantum kviksølv (under 50 mg). Af hensyn til miljøet bør dette produkt ikke bortskaffes på en losseplads. Det skal bortskaffes i henhold til lokale love og regulativer. • LCD-skærmen består af glas, der kan gå itu, hvis den behandles uforsigtigt eller tabes. Dette kan i visse tilfælde medføre udslip af en mindre mængde flydende krystaller.
• All utrustning som sammankopplas med denna produkt måste också anslutas till ett korrekt installerat jordat eluttag. • Ta inte bort kåporna. • Produkten är inte försedd med nätströmbrytare. Om du vill koppla bort skärmen från elnätet måste du dra ut stickproppen ur eluttaget. Eluttaget ska vara lättåtkomligt. • Undvika att ansluta eller koppla bort produkten under åskväder. • Använd alltid nätadaptern som följde med skärmen. Hantering: • Hantera produkten varsamt när du flyttar den.
• Nestekidenäyttö on tehty lasista, ja se voi rikkoutua kovakouraisesti käsiteltäessä tai pudotettaessa. Joissakin olosuhteissa tällöin voi päästä vapaaksi pieniä määriä nestekideainetta. Vältä koskettamasta tätä ainetta, sillä se aiheuttaa ärsytystä. Jos aine pääsee kosketuksiin silmien, käsien ym. kanssa, aluetta pitää huuhdella vedellä vähintään 15 minuutin ajan; jos huuhtelun jälkeen havaitaan ärsytysoireita, on käännyttävä lääkärin puoleen.
TEHLOKE Elektrik çarpmas77 tehlikesinden kaç77nmak için: • Cihaz, elektrik ba 5 lant7s7 için topraklanm7 t fi t li bir elektrik kablosuyla birlikte gönderilmittir. • Elektrik kablosunun fiti, elektrik ve toprak ba5lant7lar7 usulüne uygun olarak yap7lm7t bir prize tak7lmal7d7r. • Bu cihaz7n ba5lanaca57 di5er tüm cihazlar da elektrik ve toprak ba5lant7lar7 usulüne uygun olarak yap7lm7t prize tak7lm7t olmal7d7r. • Kapaklar7 ç7karmay7n7z. • Bu cihazda elektri5i açma-kapama dü5mesi yoktur.
First Edition (JUN 1999) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time. It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country.
Table of Contents Introduction Features..........................................................................................................A1 Important Precautions On Installation.................................................................................................A2 On Cleaning....................................................................................................A2 On Repacking .................................................................................................
038A Introduction The 9483 Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The 9483 is a 15.1-inch (15.1 inches viewable ) intelligent Microprocessor based monitor.
Important Precautions On Installation 1. Do not allow anything to rest upon or roll over the power cord, and do not place the monitor where the power cord is subject to damage. 2. Do not use this monitor near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 3. Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Monitor On the back of the monitor are two plug-in connections; one for the AC power cord, and the other is for the signal cable from the video card. Connect to any IBM PC 1 Power off both the monitor and PC. 2 Connect the 15-pin VGA connector of the supplied signal cable to the output VGA video connector on the PC and the matching input connector on the rear of the monitor. The connectors will mate only one way.
Connecting the Monitor Connect to an APPLE Macintosh System Figure shows the connection to an Apple Macintosh, using a separately purchased adapter. For more information on adapter requirements, contact your IBM authorized dealer for PartNumber 96G2694. 1 Power OFF both the monitor and the MAC. 2 Locate the appropriate MAC to VGA adapter block at your local computer store. This adapter changes the high density 3 row 15 pin VGA connector to the correct 15 pin 2 row connection to mate with your MAC.
Setup Diskette for Windows 95/98 Monitor Installation Disk for Windows® 95/98 To use the Plug and Play feature in Windows 95 or Windows 98, files should be loaded from the IBM color LCD Monitor Installation diskette as follow: 1 Ensure that the monitor is connected correctly. 2 Turn on the monitor and then the system unit. Allow the system to boot into windows 95 or 98. The Operating system’s Plug and Play code may advise you that your system handware has changed.
Location and Function of Controls Front View Power ON/OFF Button Power Indicator OSD ON/OFF Button OSD Selection Buttons OSD Adjustment Buttons Mode Recall Button Brightness Adjustment Buttons Rear View ID Label DC Power Connecter D-Sub Signal Connecter + - A6
1 3 2 5 4 6 7 On Screen Display(OSD) Control Adjustment 1 Start the OSD 2 3 ( ) Select an OSD icon to be adjusted ( - + ) Adjust the level of the selected item 1 Exit the OSD Control Panel Function Buttons on the underside of the monitor allow you to adjust the image easily through an OSD menu. As you choose controls, the selected icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls. The following is a description of use for each button.
Control Panel Function 5 Mode Recall Button ( ) If the monitor is operating in a factory preset mode, this control will reset the image to the factory preset mode. If the monitor is operating in a user mode, this control has no effect. Mode Recall NO SEL : 6 7 YES ENT : -+ Power Indicator ( ) This Indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode (stand-by/ suspend/power off), this indicator color changes to amber.
On Screen Display (OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description Contrast To adjust the display to the contrast desired. Contrast Min Max OSD ADJ: -+ SEL: H Position To move picture image left and right. H Position Min Max - Moves the screen image left. + Moves the screen image right.
On Screen Display (OSD) Selection and Adjustment OSD Adjust Description Clock Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. Clock Phase Min Max OSD ADJ: -+ SEL: OSD Time To select OSD display duration time. (5 - 100 seconds) OSD Time 50 Seconds OSD ADJ: -+ SEL: Color Select 9300K 6500K To select color temperature, 9300K/ 6500K and USER.
On Screen Display (OSD) Selection and Adjustment OSD Adjust OSD Description OSD Position OSD This item gives access to 2 elements : Horizontal position and Vertical position. OSD Position H Position V Position OSD ADJ: -+ SEL: Press the select button to select the desired item to change. To correct OSD image's Horizontal position and Vertical position. Horizontal position : To move image right and left. Vertical position : To move image up and down.
Video Memory Modes The monitor has 18 memory locations for display modes, 14 of which are factory preset to popular video modes. Factory Preset Timing Signal Chart Video B A C F Sync D H O R I Z O N T A L V E R T I C A L Polarity Frequency kHz E Mode1 Mode2 Mode3 Mode4 Mode5 Mode6 Mode7 + - - - - - + 31.468 31.468 31.469 35.00 37.861 37.50 35.
Factory Preset Modes H O R I Z O N T A L V E R T I C A L Polarity Frequency kHz Mode8 Mode9 Mode10 Mode11 Mode12 Mode13 Mode14 + + + - - - + 37.879 48.077 46.875 49.725 48.363 56.476 60.
User Modes Modes 15-18 are empty and can accept new video data. If the monitor detects a new video mode that has not been present before or is not one of the preset modes, it stores the new mode automatically in one of the empty modes starting with mode 15. If you use the 4 blank modes and still have more new video modes, the monitor replaces the information in the user modes starting with mode 15.
Power Management System This monitor incorporates new circuitry for lowering energy usage during idle time, following the Display Power Management Signalling (DPMS) guide lines of the Video Electronics Standards Association (VESA), as an Energy Star Partner, IBM has determined that this product meets the Energy Star guidelines for energy efficiency. For the power savings feature to operate, the monitor must be used with a PC having power saving circuitry.
Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an anti-static screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range.
Troubleshooting Any horizontal noise appearing in any image or characters are not clearly portrayed. The input signal data has not been optimized for the current operating mode. (Adjust the CLOCK PHASE by using the OSD function.) Check Signal Cable message. The signal cable is not connected. Outside Range Limits message appears. Picture is blank. The frequency of the signal from the video card is outside the operating range of the monitor.
Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call IBM HELPCENTER. In the US call 1-800-772-2227 In Canada call 1-800-565-3344 In other countries, contact your dealer, retailer, or other IBM authorized servicer. Before calling, please have available as much of the following information as possible: 1. Type, model and serial number from the label on the back of your monitor. 2. Purchase receipt. 3. Description of problem. 4. Computer type and model. 5.
Specifications Sync Signal type Type H. sync V.sync Separate sync H. sync V. sync Signal Connector Pin Assignment 1 5 6 11 10 15 Pin Separate Sync 1 2 3 4 5 6 7 8 Red Green Blue Ground Self-Test Red Ground Green Ground Blue Ground Pin Separate Sync 9 10 11 12 13 14 15 NC Ground Ground SDA Horizontal Sync Vertical Sync SCL AC-DC Adapter Input AC 100-240V, 50-60Hz, 81-120VA, 1.2A Out put DC 24V 1.5A - Use only the AC-DC adapter supplied with the monitor.
Specifications Display Type Viewable Size Pixel pitch True color Sync Input Horizontal Freq. Vertical Freq. Input form Signal input Video Input Display Area Input Form Resolution 15.1inch (38.36cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating 15.1inch (38.36cm) 0.3 x 0.3mm 16.7million Refer to pages A12 and A13 for mode timing parameters Refer to pages A12 and A13 for mode timing parameters Separate, TTL, Positive/Negative 15 pin D-Sub connector 307 x 230mm Separate, RGB Analog, 0.
Compliances Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Compliances MPRII This product complies with Swedish National Council for Metrology (MPR) standards issued in December 1990 (MPRII) for very low frequency (VLF) and extremely low frequency (ELF). Hinweise Gemäß der Amtsblätter des BMPT Nr. 61/1991 und 6/1992 wird der Betreiber darauf aufmerksam gemacht, dass die von ihm mit diesem Gerät zusammengestellte Anlage auch den technischen Bestimmungen dieser Amtsblätter genügen muss.
back of the manual Environmental Labelling of Personal Computers Congratulations! You have just purchased a TCO’95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally-adapted electronic products.
Environmental Labelling of Personal Computers The requirements cover a wide range of issues: environment, ergonomics, usability, emission of electrical and magnetic fields, energy consumption and electrical and fire safety. The environmental demands concern, among other things, restriction on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons), and chlorinated solvents.
Environmental Labelling of Personal Computers TCO’95 Environmental Requirements Brominated flame retardants are present in printed circuit boards, cabling, casings, and housings, and are added to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame-retardant substances. These are related to another group of environmental toxins, PCBs, and are suspected of giving rise to similar harm, including reproductive damage in fish-eating birds and mammals.
Environmental Labelling of Personal Computers Shipping Package The packaging material can be recycled, or you can save it to return the monitor to a service center for repair or disposal. CFC Compounds in Distribution Packaging Cushioning material used for shipping finished monitors are not manufactured with nor do they contain any CFC compounds. Design for Disassembly/Recycling These monitors have been designed for easy end-of-life disassembly and recycling.
Warranty Statement of Limited Warranty The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. Unless IBM specifies otherwise, the following warranties apply only in the country where you acquire the Machine.
Warranty You agree to: 1. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own; and 2. where applicable, before service is provided a) follow the problem determination, problem analysis, and service request procedures that IBM or your reseller provide, b) secure all programs, data, and funds contained in a Machine, and c) inform IBM or your reseller of changes in a Machine’s location.