FRANÇAIS DEUTSCH ESPAÑOL ITALIANO JAPANESE COMPL & WARR English ENGLISH T54A-E.
T54A-E.book Page 2 Saturday, February 19, 2000 12:05 PM First Edition (Mar/2001) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time.
2 2 2 2 3 3 5 5 DEUTSCH Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Monitor Position .
T54A-E.book Page 2 Saturday, February 19, 2000 12:05 PM Setup Hardware Requirements This monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or VGA 640 x 480 at 60 Hz. Handling Instructions Do not support the monitor within the screen area. The Liquid Crystal Display is glass and can be damaged by rough handling or excessive pressure. 1. Lift the monitor by placing your hands where indicated below. 2.
ENGLISH T54A-E.book Page 3 Saturday, February 19, 2000 12:05 PM FRANÇAIS Adjusting the Monitor Position Viewing Angle ESPAÑOL DEUTSCH You can tilt the screen backward and forward as shown below. Rest Take regular breaks. Vary your posture, stand up and stretch occasionally as prolonged use of computer workstations can be tiring. JAPANESE Back You should sit back in your chair and use the backrest.
T54A-E.book Page 4 Saturday, February 19, 2000 12:05 PM Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly. Screen settings Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.
ENGLISH T54A-E.book Page 5 Saturday, February 19, 2000 12:05 PM 1. Turn off your PC and all attached devices. 2. Connect the signal cable to the video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or video adapter card may be colored blue to match the blue connector on your monitor’s video cable. The AC adapter and signal cable are connected to your monitor.
T54A-E.book Page 6 Saturday, February 19, 2000 12:05 PM Configuring your Monitor Setup Diskette for Windows95 or Windows 98 This section must be completed before continuing with the Windows 95 or Windows 98 Auto Setup on Page 10. On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. IBM recommends using 1024 x 768 at a refresh rate of 60Hz.
ENGLISH T54A-E.book Page 7 Saturday, February 19, 2000 12:05 PM Setup Diskette for Windows 2000 Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow the system to boot into Windows 2000. 4. Open the DISPLAY PROPERTIES window by clicking on START, SETTINGS, CONTROL PANEL and then double clicking on the DISPLAY icon. 5. Select the SETTINGS tab. 6. Select the ADVANCED button. 7. Select the MONITOR tab. 8. Select the PROPERTIFS button. 9.
T54A-E.book Page 8 Saturday, February 19, 2000 12:05 PM Auto Setup Auto Setup Before carrying out this section, it is very important that The Setup Diskette for Windows 95 or Windows 98 has been run. (see page 6) The Setup Utility included on the setup diskette is for displaying do patterns. They do not replace or modify the display dirver. The Auto Setup instructions require the monitor to be warmed up for 15 minutes. This is not required for normal operation.
ENGLISH T54A-E.book Page 9 Saturday, February 19, 2000 12:05 PM FRANÇAIS Auto Setup for DOS If the monitor is in standby mode (STANDBY ON), it may automatically turn off while you are waiting for it to warm up. If this happens, switch off the monitor and switch it on again after a few seconds. 1. If you are using PC-DOS/ V, change to U.S. mode by typing ‘CHEV US’ and pressing ENTER at the command prompt. You must use DOS when you run DOS Auto Setup. 2.
T54A-E.book Page 10 Saturday, February 19, 2000 12:05 PM Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows NT or Windows 2000 If the monitor is in standby mode (STANDBY ON), it may automatically turn off while you are waiting for it to warm up. The size and diversity of the dot pattern varies with the screen resolution. 1. Turn on the monitor first; then the PC.
ENGLISH T54A-E.book Page 11 Saturday, February 19, 2000 12:05 PM COMPL & WARR JAPANESE ITALIANO ESPAÑOL DEUTSCH FRANÇAIS You have completed the monitor setup for Windows. If you use other operating systems, perform the appropriate AUTO SETUP for those systems, also: see Auto Setup for DOS on page 9.
T54A-E.book Page 12 Saturday, February 19, 2000 12:05 PM Manual Setup Normally, you can complete the setup procedure using AUTO SETUP, however, if your screen image is still distorted after you perform AUTO SETUP or the setup diskette does not run on your system, perform MANUAL SETUP. If the monitor is in standby mode (STANDBY ON), it might automatically turn off while you are waiting for it to warm up. 1. Have your monitor turned on for about 15 minutes, until the monitor warms up. 2.
ENGLISH T54A-E.
T54A-E.book Page 14 Saturday, February 19, 2000 12:05 PM The settings are saved after adjustment and when exiting the OSD and will be effective thereafter. • Press the Exit button to move backwards through the sub-menus and exit from the OSD. Note: After making adjustments, the Power indicator LED will briefly turn amber to indicate that the new value has been saved.
ENGLISH T54A-E.book Page 15 Saturday, February 19, 2000 12:05 PM FRANÇAIS On-screen display (OSD) controls The settings adjustable with the user controls are viewed through the OnScreen Display (OSD). Press any of the OSD buttons to activate the OSD. DEUTSCH Initial appearance of OSD ESPAÑOL The LCD monitor needs time to become thermally stable the first time you turn it on each day.
T54A-E.book Page 16 Saturday, February 19, 2000 12:05 PM OSD Icon Description Sub-menu(s) Manual • • IMAGE LOCK (continued) Moves the screen left and right or up and down. Fine Coarse Controls and Adjustments Use the Arrow buttons to adjust away the interference. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. This function may change the width of the display image.
ENGLISH T54A-E.book Page 17 Saturday, February 19, 2000 12:05 PM Sub-menu(s) Resets the Brightness, Contrast and Color settings. Color Reset Controls and Adjustments NO - Does not make the adjustment RESET YES - Resets the color Resets the Image position settings Geometry Reset NO - Does not make the adjustment Shows information about the addressability and the horizontal and vertical frequencies of the images received from the computer or video board.
T54A-E.book Page 18 Saturday, February 19, 2000 12:05 PM Further Information Display modes The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using AUTO SETUP and the monitor controls.
ENGLISH T54A-E.book Page 19 Saturday, February 19, 2000 12:05 PM The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
T54A-E.book Page 20 Saturday, February 19, 2000 12:05 PM Troubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem.
Suggested Action Reference Check that the signal Screen is blank and power indicator is flashing amber every 0.5 or 1 second The monitor is in the Power Management Suspend or Off state Press any key on the keyboard or move the mouse to restore operation. Check the Power Management software on your computer. Image appears to be smeared There are noises in the video signal Select IMAGE LOCK menu in the OSD. Then select MANUAL to adjust FINE/COARSE settings.
T54A-E.book Page 22 Saturday, February 19, 2000 12:05 PM Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call the IBM HELPCENTER. In the US call 1-800-772-2227 In Canada call 1-800-565-3344 In other countries contact your dealer, retailer, or other IBM authorized Servicer. If possible, stay by your computer. Your Technical Support Representative may wish to go through the problem with you during the call.
Carefully insert the head of a flathead (–) screwdriver into the slot visible along either side of the cable cover (a) and pry it off. DEUTSCH FRANÇAIS 2. ENGLISH T54A-E.book Page 23 Saturday, February 19, 2000 12:05 PM a b 4. Gently lift the stand cover (c) along the top and then slide it backwards and off the stand. 5. Remove the signal cable and the power cord from the monitor by disconnecting the corresponding adapters.
T54A-E.book Page 24 Saturday, February 19, 2000 12:05 PM Specifications This color monitor (Type-model 9511-Axx) uses a 15-inch TFT LCD Power consumption figures are for the monitor and the power supply combined. 24 Dimensions Width: Depth: Height: 401 mm 202 mm 371 mm Weight Unpackaged: packaged: 11.2 lb. (5.1 Kg) 13.9 lb. (6.3 Kg) Tilt Forward Tilt: Backward tilt: – 4° + 41° Image Viewable Image Size: Maximum Height: Maximum Width: Pixel Pitch: 15.0” (381 mm) 228.1 mm 304.1 mm 0.
ENGLISH T54A-E.book Page 25 Saturday, February 19, 2000 12:05 PM FRANÇAIS Warranty Statements Your Installation Diskette includes translation of IBM’s Statement of Warranty in following languages: Bulgarian Z1255697.bul.html Chinese Z1255697.chi.html Croatian Z1255697.cro.html Czech Z1255697.cze.html Danish Z1255697.dan.html Dutch Z1255697.dut.html English Z1255697.eng.html Finnish Z1255697.fin.html French Z1255697.fre.html German Z1255697.ger.html Greek Z1255697.gre.
T54A-E.book Page 26 Saturday, February 19, 2000 12:05 PM Spanish Z1255697.spa.html Swedish Z1255697.swe.html Taiwanese Z1255697.tai.html Turkiye Statement of Warranty: Turkish Z1255698.tur.html English Z1255698.eng.html United States, Puerto Rico and Candada Statem ent of Lim ited Warranty: 26 English Z1254753.eng.html French Canadian Z1254753.fca.
