IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA Installation and User’s Guide GC26-7814-00
IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA Installation and User’s Guide GC26-7814-00
Note: Before using this information and the product it supports, be sure to read the general information under Appendix B, “Notices,” on page 35. First Edition (March 2006) © Copyright International Business Machines Corporation 2006. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi About this document . . . . . . . . . . . . . . . . . . . . . . xv Who should read this document . . . . . . . . . . . . . . . . . . . xv FAStT product renaming . . . . . . . . . . . . . . . . . . . . . xv DS4000 Storage Subsystem installation tasks - General overview . . . . . .
For Microsoft Windows 2000 or Server 2003 . . . . . . . . . . . . 21 For Linux . . . . . . . . . . . . . . . . . . . . . . . . . 21 Chapter 3. Configuring the FC 4Gbps PCI-X Adapter with Fast!UTIL . Starting Fast!UTIL . . . . . . . . . . . . . . . . . . . . . Accessing HBA settings through Fast!UTIL . . . . . . . . . . . Host bus adapter settings . . . . . . . . . . . . . . . . . Advanced FC 4Gbps PCI-X Adapter Settings . . . . . . . . . . Selectable boot settings . . . . . . . . . . . . . . . . .
DS4300 Fibre Channel Storage Server library . . DS4100 SATA Storage Server library . . . . . . DS4000 Storage Expansion Enclosure documents . Other DS4000 and DS4000-related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 51 52 53 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Figures 1. 2. FC 4Gbps PCI-X Adapter serial number label . . . . . . . . . . . . . . . . . . . . . 3 FC 4Gbps PCI-X Adapter components . . . . . . . . . . . . . . . . . . . . . . . 4 © Copyright IBM Corp.
viii IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Tables 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Mapping of FAStT names to DS4000 Series names . . . . . . . . . . . . . . . . . . xv Where to find DS4000 installation and configuration procedures . . . . . . . . . . . . . xvi FC 4Gbps PCI-X Adapter activity . . . . . . . . . . . . . . . . . . . . . . . . . 5 FC 4Gbps PCI-X HBA data rates . . . . . . . . . . . . . . . . . . . . . . . . . 25 FC 4Gbps PCI-X Adapter operating environment . . . . . . . . . . . . . . . . . . .
x IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Safety Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit product installeert eerst de veiligheidsvoorschriften. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité.
Antes de instalar este producto, lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet.
CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.
xiv IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
About this document This book provides instructions for installing and customizing the configuration of your IBM System Storage™ DS4000 FC 4Gbps PCI-X Single/Dual Port HBA and connected devices. It also provides information on troubleshooting your IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA. Who should read this document This document is intended for system operators and service technicians who have extensive knowledge of fibre channel and network technology.
DS4000 Storage Subsystem installation tasks - General overview Table 2 provides a sequential list of many installation and configuration tasks that are common to most DS4000 configurations. When you install and configure your DS4000 storage subsystem, refer to this table to find the documentation that explains how to complete each task. See also: The DS4000 Storage Server and Storage Expansion Enclosure Quick Start Guide provides an excellent overview of the installation process. Table 2.
Table 2.
Table 2.
v Check for technical information, hints, tips, and new device drivers at the following Web site: www.ibm.com/servers/storage/support/disk/ v Use an IBM discussion forum on the IBM Web site to ask questions. You can solve many problems without outside assistance by following the troubleshooting procedures that IBM provides in the online help or in the documents that are provided with your system and software.
v For the latest information about operating system and HBA support, clustering support, SAN fabric support, and Storage Manager feature support, see the TotalStorage DS4000 Interoperability Matrix at the following Web site: www.ibm.com/servers/storage/disk/ds4000/interop-matrix.html Software service and support Through IBM Support Line, for a fee you can get telephone assistance with usage, configuration, and software problems with xSeries servers, IntelliStation workstations, and appliances.
You can also mail your comments by using the Reader Comment Form in the back of this manual or direct your mail to: International Business Machines Corporation Information Development Dept. GZW 9000 South Rita Road Tucson, AZ 85744–0001 U.S.A. When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believes appropriate without incurring any obligation to you.
Appendix F, “Additional DS4000 documentation,” on page 45 provides references to other DS4000 publications.
Notices used in this document The caution and danger statements used in this book also appear in the multilingual Safety Information book provided with your IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA. Each caution and danger statement is numbered for easy reference to the corresponding statements in the safety book. The following types of notices and statements are used in this book: v Note: These notices provide important tips, guidance, or advice.
xxiv IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Chapter 1. Preparing and installing the IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA This chapter contains instructions for preparing and installing the IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA and describes the adapter components. The IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA is referred to throughout this book as the FC 4Gbps PCI-X Adapter.
FC 4Gbps PCI-X Adapter features The FC 4Gbps PCI-X Adapter has the following features: v 64-Bit, PCI-X 2.0 266 MHz, compatible with 66/33 MHz PCI and 133/100/66 MHz PCI-X. v Conforms to PCI Local Bus Specification, revision 2.3 and 3.0, PCI-X Protocol Addendum to the PCI Local Bus Specification, revision 2.0a, PCI-X Electrical and Mechanical Addendum (revision 2.0a) to the PCI Local Bus Specification, PCI Bus Power Management Interface Specification revision 1.1, PCI Hot Plug Specification, revision 1.0.
1 2 4 ds4hb003 3 Figure 1. FC 4Gbps PCI-X Adapter serial number label Components shown in Figure 2: 1. Yellow, Green, and Amber LEDs for port 1 2. Port 1 (top), port 2 (bottom) Note: Port 2 and LEDs for port 2 are for the dual port FC 4Gbps PCI-X Adapter only. 3. Yellow, Green, and Amber LEDs for port 2 4. Serial number label Handling static-sensitive devices Attention: Static electricity can damage electronic devices and your system.
v Take additional care when handling devices during cold weather because heating reduces indoor humidity and increases static electricity. What you need for the installation To install the FC 4Gbps PCI-X Adapter in your server, you will need a small Phillips screwdriver.
Table 3 describes the yellow, green, and amber light emitting diodes (LEDs) and the activity of the FC 4Gbps PCI-X Adapter. For more information about the FC 4Gbps PCI-X Adapter LED activity, see the IBM System Storage DS4000 Problem Determination Guide. Table 3. FC 4Gbps PCI-X Adapter activity Yellow LED Green LED Amber LED Activity Description Off Off Off Power off The server adapter is not receiving power. The server is powered off.
Installing the FC 4Gbps PCI-X Adapter Attention: To avoid damage to your fiber-optic cables, follow these guidelines: v Do not route the cable along a folding cable-management arm. v For devices on slide rails, leave enough slack in the cables so that they do not bend to a diameter of less than 76 mm (3 in.) or to a radius less than 38 mm (1.5 in.) when extended or become pinched when retracted. v Route the cable away from places where it can be damaged by other devices in the rack cabinet.
a. Remove your FC 4Gbps PCI-X Adapter from the static-protective package. Set the adapter down on a nonconductive, static-protected surface (place it component side up). Do not place the adapter on your system unit cover or on a metal table. b. Use your small Phillips (#1) screwdriver to carefully remove the two bracket screws from your 3U adapter, (you will reuse the two adapter screws). Take off the 3U bracket and set it aside. c.
9. Connect one end of an LC-LC Fibre Channel cable to the optical interface connector on the FC 4Gbps PCI-X Adapter. Connect the other end to a Fibre Channel device. 10. Carefully install and secure the server cover. 11. Connect the power cables. 12. Turn on all external Fibre Channel devices; then, turn on the server.
Chapter 2. Installing the FC 4Gbps PCI-X Adapter device drivers and updating the BIOS code Note: For the latest information about supported operating systems, versions of device drivers, utilities, and documentation, go to http://www-1.ibm.com/ servers/storage/support/disk/. After installing your FC 4Gbps PCI-X Adapter, you must perform one of the following two steps. 1.
Installing the QLogic SANsurfer Pro Utility The installation files for the QLogic SANsurfer Pro Utility, for Microsoft Windows 2000 and Server 2003, Novell NetWare, or Linux platforms, can be found in either the SANSurfer_FAStT-MSJ folder on the DS4000 Storage Manager host software CD or in the downloadable Web package at the DS4000 Technical Support Web site, at www.ibm.com/servers/storage/support/disk/.
Note: Remember, the drive letter must be mapped to the root of the NetWare SYS volume. 5. When you are prompted to enable the QLogic failover configuration, do not enable it. (IBM recommends the use of the RDAC multipath driver as the DS4000 LUN failover/failback driver, in a Microsoft Windows environment or the Novell NetWare native multipath device driver in a NetWare environment.) The following are known limitations.
3. At the ″Choose Product Features″ screen, select either option a. or b. of the two preconfigured installation sets listed below; or, select ″Custom″ to define an installation set. a. ALL GUIs and ALL Agents to install the SANsurfer FC HBA Manager, the SANsurfer FC HBA Manager, and SANsurfer Switch Manager GUIs, including the FC and iSCSI (Windows, Linux, or Solaris) agents, or b. SANsurfer FC HBA Manager to install only the SANsurfer FC HBA Manager GUI.
questions about the installation, please see the instructions in the readme_SANsurfer_FAStMSJ_Linux_IA32.txt file. Using the QLogic SANsurfer Pro Utility This section provides an overview of the QLogic SANsurfer Pro Utility program. Experienced users can use this program to customize the configuration of the FC 4Gbps PCI-X Adapter when it is installed in a server.
– Link status for attached device v Perform adapter functions, including: – Configuring the adapter NVRAM settings – Executing fibre diagnostics (read/write buffer loopback tests) – Performing flash updates on an adapter – Performing NVRAM updates on an adapter v Manage configurations: – Save configurations for offline policy checks and SAN integrity – Load configurations from a file if the host is offline for policy checks and SAN integrity v Confirm security SANsurfer Pro utilities Within the SANsurfer P
5. In the SANsurfer FC HBA window, in the ″FC HBA″ tab on the left pane, select the port under the newly installed FC 4Gbps PCI-X Adapters; the ″Information″ tab in the right pane displays all the information about the new adapters. 6. In the row of tabs at the top of the right pane in the SANsurfer program window, click on the ″Utilities″ tab. Then, in the center of the Utilities information pane you will find seven buttons: click on the ″Update Option ROM″ button. This will start the BIOS update.
Important: 1. Because there are two NVRAM setting areas per dual port FC 4Gbps PCI-X Adapter (one NVRAM setting area for each port), you must select each of the ports separately and perform the NVRAM update for each port, provided you want to update the NVRAM settings on both ports. 2. Updating the NVRAM firmware resets all of the NVRAM settings to the default. After updating the NVRAM firmware, you must reenter all custom configuration settings required for your specific operating system.
3. The flasutil program will display the existing version of the BIOS, the newer BIOS version, and a message telling you if the update was successful or unsuccessful. The following output example resembles the output you might see upon execution of the flasutil /i /FB xxxx /o BiosFirmwarefile.bin command, where, for this example, 2300 is substituted for xxxx. QLogic NOVRAM and FLASH Programming Utility Version 1.55 Copyright (C) QLogic Corporation 1998-2005. All rights reserved.
where xxxx is the adapter address. If xxxx is omitted, then the program will attempt to change (on all of the adapters in the host) the standard NVRAM defaults in the adapter, to the new defaults from the NVRAM files. 8. Press ″Enter.″ 9. The flasutil program will display the existing version of the NVRAM, the newer NVRAM version, and a message telling you if the update was successful or unsuccessful.
1. At the DOS prompt, type: flasutil /? 2. Press ″Enter.″ The following command-line options display: /L xxxx = Write NOVRAM to adapter address xxxx If no address specified then write NOVRAM to all adapters /F xxxx = Write Flash to adapter, adapter address = xxxx /FR xxxx = Write ISP2322/6322 Risc Code to Flash , adapter address = xxxx /FB xxxx = Write MultiFlash image to adapter, adapter address = xxxx If no address specified then write Flash to all adapters /D xxxx = Copy NOVRAM to file: QLxxNVR.
v To update BIOS NVRAM defaults, type: flasutil /U Press ″Enter.″ v To verify NVRAM in all adapters, type: flasutil /X Press ″Enter.″ Using the flasutil BIOS Update Utility menu Complete the following steps to update the DS4000 FC 4Gbps PCI-X Adapter BIOS code, using the flasutil BIOS Update Utility menu: 1. CD: Insert the IBM System Storage DS4000 FC 4Gbps PCI-X Host Bus Adapter Support CD into the CD-ROM drive. Restart the server. Your server starts to a DOS prompt.
8. Repeat Steps 2 through 6 for each additional adapter or if you want to configure your adapter with more than one option. 9. CD: Remove the CD from the CD-ROM drive and restart the server. Diskette: Remove the diskette from the disk drive, and restart the server. 10. Go to “Installing the FC 4Gbps PCI-X Adapter device drivers” on page 9.
unmount /mnt 8. Remove the IBM System Storage DS4000 PCI-X Host Bus Adapter Support CD from the CD-ROM drive. 9. Remove the diskette from the diskette drive and label the diskette appropriately. 10. To update the DS4000 FC 4Gbps PCI-X Adapter BIOS code and NVRAM using the BIOS Update Utility from the diskette, choose one of the following methods: v flasutil command prompt. Use this method to type in command-line options. v flasutil BIOS Update Utility menu.
Chapter 3. Configuring the FC 4Gbps PCI-X Adapter with Fast!UTIL This chapter provides detailed configuration information for advanced users who want to customize the configuration of the FC 4Gbps PCI-X Adapter and the connected fibre-channel devices. You can configure the adapter using the Fast!UTIL utility. Starting Fast!UTIL Important: If the configuration settings are incorrect, the FC 4Gbps PCI-X Adapter will not function properly.
v Exit FASt!UTIL You can access the host bus adapter settings through the Configuration Settings menu in Fast!UTIL. See “Host bus adapter settings” and“Advanced FC 4Gbps PCI-X Adapter Settings” on page 25 for detailed information on the settings. Host bus adapter settings You can modify most of the host bus adapter settings. The current default settings for the host bus adapter are listed in “Advanced FC 4Gbps PCI-X Adapter Settings” on page 25. These settings are described following the table.
FC 4Gbps PCI-X Adapter hard loop ID This setting forces the adapter to attempt to use the ID specified in the Hard Loop ID setting. The default is Disabled. Hard loop ID If the FC 4Gbps PCI-X Adapter Hard Loop ID setting is Enabled, the adapter attempts to use the ID specified in this setting. The default ID is 0. You should set this ID to a unique value from 0-125 if there is more than one adapter connected to a FC-AL loop, and the FC 4Gbps PCI-X Adapter Hard Loop ID setting is Enabled.
Enable LIP Reset This setting determines the type of loop initialization process (LIP) reset that is used when the operating system initiates a bus reset routine. When this setting is Yes, the driver initiates a global LIP reset to clear the target device reservations. When this setting is No, the driver initiates a global LIP reset with full login. The default is No. Enable LIP Full Login This setting instructs the ISP chip to log in again to all ports after any LIP. The default is Yes.
hard disk that is attached to the DS4000 FC 4Gbps PCI-X, select the attached fibre-channel hard disk from the system BIOS menu. Note: The Selectable Boot Settings option for the DS4000 FC 4Gbps PCI-X applies to only fibre-channel hard disk drives. Restore default settings You can use the Restore Default Settings option to restore the DS4000 FC 4Gbps PCI-X default settings and NVRAM.
ExitFast!UTIL After you complete the configuration, use the ExitFast!UTIL option to exit the menu and restart the system.
Chapter 4. FC 4Gbps PCI-X Adapter operating environment and specifications This chapter contains the DS4000 FC 4Gbps PCI-X Adapter operating environment and specification information. Table 5. FC 4Gbps PCI-X Adapter operating environment Environment Minimum Maximum Operating temperature 10° C (50° F) 35° C (95° F) Storage temperature -20° C (-4° F) 70° C (158° F) Relative humidity (noncondensing) 8% 80% Storage humidity (noncondensing) 5% 95% Table 6.
Table 6.
Chapter 5. Troubleshooting The following four types of installation problems might cause your DS4000 FC 4Gbps PCI-X Adapter to function incorrectly: v Hardware problems v Software problems v System configuration problems v Fibre Channel problems If you are having problems, use the following information to help you determine the cause of the problem and the action to take.
Note: All PCI-compliant and PCI-X-compliant systems automatically detect 32-Bit or 64-Bit adapters and set the appropriate bus speed (for example, 66 MHz or 133 MHz). If you still have a system configuration problem, refer to the documentation that comes with your server, or contact your IBM technical-support representative to determine if your system board requires special configuration.
Appendix A. Accessibility This section provides information about alternate keyboard navigation, which is a DS4000 Storage Manager accessibility feature. Accessibility features help a user who has a physical disability, such as restricted mobility or limited vision, to use software products successfully.
Table 7. DS4000 Storage Manager alternate keyboard operations (continued) Short cut Action Alt+ underlined letter Access menu items, buttons, and other interface components by using the keys associated with the underlined letters. For the menu options, select the Alt + underlined letter combination to access a main menu, and then select the underlined letter to access the individual menu item. For other interface components, use the Alt + underlined letter combination.
Appendix B. Notices This publication was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
Trademarks The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both: IBM e-business logo IntelliStation Netfinity® QLogic® Novell® xSeries ServerProven® System Storage Update Connector™ SANsurfer® NetWare® Intel, Celeron, MMX™, LANDesk, Pentium®, Pentium II Xeon, Pentium III Xeon, and Xeon are trademarks of Intel Corporation in the United States, other countries, or both.
IBM makes no representation or warranties regarding non-IBM products and services that are ServerProven®, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. These products are offered and warranted solely by third parties. IBM makes no representations or warranties with respect to non-IBM products. Support (if any) for the non-IBM products is provided by the third party, not IBM.
This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connection to public telecommunication systems in the United Kingdom. European Union EMC Directive conformance statement This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Appendix C. European Directive About Product Recycling and Disposal This unit must be recycled or discarded according to applicable local and national regulations. IBM encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. IBM offers a variety of product return programs and services in several countries to assist equipment owners in recycling their IT products.
40 IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Appendix D. Battery Return Program This product may contain sealed lead acid, nickel cadmium, nickel metal hydride, lithium, or lithium ion battery. Consult your user manual or service manual for specific battery information. The battery must be recycled or disposed of properly. Recycling facilities may not be available in your area. For information on disposal of batteries outside the United States, go to http://www.ibm.com/ibm/environment/ products/batteryrecycle.
42 IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Appendix E. Cable Warning WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. © Copyright IBM Corp.
44 IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Appendix F. Additional DS4000 documentation The following tables present an overview of the IBM System Storage DS4000 Storage Manager, Storage Subsystem, and Storage Expansion Enclosure product libraries, as well as other related documents. Each table lists documents that are included in the libraries and what common tasks they address. You can access the documents listed in these tables at both of the following Web sites: www.ibm.com/servers/storage/support/disk/ www.ibm.
DS4800 Storage Subsystem library Table 9 associates each document in the DS4800 Storage Subsystem library with its related common user tasks. Table 9.
DS4700 Storage Subsystem library Table 10 associates each document in the DS4700 Storage Subsystem library with its related common user tasks. Table 10.
DS4500 Fibre Channel Storage Server library Table 11 associates each document in the DS4500 (previously FAStT900) Fibre Channel Storage Server library with its related common user tasks. Table 11.
DS4400 Fibre Channel Storage Server library Table 12 associates each document in the DS4400 (previously FAStT700) Fibre Channel Storage Server library with its related common user tasks. Table 12.
DS4300 Fibre Channel Storage Server library Table 13 associates each document in the DS4300 (previously FAStT600) Fibre Channel Storage Server library with its related common user tasks. Table 13.
DS4100 SATA Storage Server library Table 14 associates each document in the DS4100 (previously FAStT100) SATA Storage Server library with its related common user tasks. Table 14.
DS4000 Storage Expansion Enclosure documents Table 15 associates each of the following documents with its related common user tasks. Table 15.
Other DS4000 and DS4000-related documents Table 16 associates each of the following documents with its related common user tasks. Table 16.
54 IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide
Index A about this book xv adapter activity indicators 5 components 4 FC 4Gbps PCI-X HBA data rates installing 6 operating environment 29 overview 1 preinstallation procedures 2 specifications 29 storage temperature 29 adapter features 2 DS4100 DS4300 DS4400 DS4500 DS4700 DS4800 25 C cables connecting fiber optic 6 LC-LC Fibre Channel 8 routing 6 comments, how to send xx Concepts Guide 45 Copy Services Guide 45 D device drivers 9 devices, handling static-sensitive 3 documentation DS4000 43 DS4000 Storag
P PCI bus slot master 7 subordinate 7 PCI bus-master slot defined 7 PCI-X bus-master slot defined 7 PCI/PCI-X signaling 29 transfer rate 29 R renaming xv S software service and support specifications, adapter 29 xx T tasks by document title tasks by documentation trademarks 36 troubleshooting Fibre Channel 32 hardware 31 installation problems system configuration 45 title 43 31 31 U updating the BIOS code using the command prompt 9 using the utility diskette 20 Using the flasutil command prompt upd
Part Number: 39M5599 GC26-7814-00 (1P) P/N: 39M5599 Printed in USA
