Printer User Manual

Media Specifications
The Infoprint 3000ES1 and ED1/ED2 printers accept the following media:
Media types:
Preprinted or blank fanfold forms, roll-feed paper
Media widths:
Model ES1
8 inches to 18 inches (203 mm to 457 mm)
Models ED1/ED2
9 inches to 18 inches (229 mm to 457 mm)
Media lengths:
7 inches to 14 inches (178 mm to 356 mm) standard; 7 inches to 28 inches (178 mm to 712 mm)
with pre- and post-processing options
Media weights:
Model ES1
16 lb. to 42 lb. (60 gsm to 157 gsm)
Models ED1/ED2
16 lb. to 28 lb. (60 gsm to 105 gsm)
Attachments
The InfoPrint 3000-ES1 and 3000-ED1/ED2 support a maximum of two attachments. These attachments
can be:
v ESCON channel
v System/370 parallel channel
v Token Ring (TCP/IP)
v Ethernet (TCP/IP)
v FDDI (TCP/IP)
The two attachments may be the same (for example, two ESCON channels), or mixed (for example, one
ESCON and one Token-Ring). The exception is that the printer can have only one TCP/IP attachment of
any flavor. You cannot have two Token-Ring attachments, for example. For a single printer (a simplex
printer, a duplex printing system, or a dual simplex printer), only one attachment can be active at a time. If
8.5 inches
Default
Media
Origin
0, 0
11.0
inches
Top
Printable
Area
Narrow Form
Wide Form
11 inches
Printable
Area
Top
Default
Media
Origin
0, 0
8.5
inches
Figure 25. Printable Area on the Infoprint 3000ES1 and ED1/ED2 Printers
Chapter 13. Infoprint 3000ES1 and ED1/ED2 Printers (3300) 75