User guide

Configuring Protection Domains
79
Proventia Network IPS G and GX Appliance User Guide
3. Click OK.
4. Save your changes.
Working with
protection domains
To edit, copy, or remove protection domains:
1. Select Protection Domains.
2. Do one of the following:
3. Save your changes.
Adapter Select an appliance monitoring adapter or a list of monitoring
adapters.
Note: The appliance ignores port configurations that do not
apply to the specific appliance. For example, the appliance
may only allow you to configure two adapter ports if it only has
two ports, even though there are additional ports available for
configuration.
VLAN Range Type the range of virtual LAN tags or leave blank.
IP Address Range Type the range of source and destination IP addresses.
Setting Description
If you want to... Then...
Edit Tip: You can edit some properties directly on the Protection
Domains page by double-clicking the item you want to
configure.
1. Select the domain, and then click the Edit icon.
2. Select or clear the Enabled check box.
3. Edit the domain, and then click OK.
Copy
1. Select the domain, and then click the Copy icon.
2. Click the Paste icon.
3. Edit the domain as needed, and then click OK.
Remove 1. Select the domain.
2. Click the Remove icon.