User guide

Chapter 7: Configuring Responses
74
Working with
SNMP responses
To edit, copy, or remove SNMP responses:
1. Do one of the following:
■ In Proventia Manager, select Responses.
■ In SiteProtector, select Response Objects.
2. Select the SNMP tab.
3. Do one of the following:
4. Save your changes.
If you want to... Then...
Edit Tip: You can edit some properties directly on the SNMP tab by
double-clicking the item you want to configure.
1. Select the response, and then click the Edit icon.
2. Select or clear the Enabled check box.
3. Edit the response, and then click OK.
Copy
1. Select the response, and then click the Copy icon.
2. Click the Paste icon.
3. Edit the response as needed, and then click OK.
Remove 1. Select the response.
2. Click the Remove icon.