User guide

Chapter 2: Configuring Appliance Settings
32
Reconfiguring the
appliance
To reconfigure the appliance after you reinstall the software, follow the setup instructions
in “Using Proventia Setup” on page 21.
Notes:
● You should complete the appliance configuration while connected to the PXE boot
server. When you have completed all reinstallation and reconfiguration steps, press
C
TRL+G to shut down the PXE server.
● To access firmware and database updates, you must have Internet access. Disconnect
the PXE boot server and re-connect the management interface to the network for
Internet access.