User guide

Chapter 11: Configuring Local Tuning Parameters
132
Adding advanced
parameters
To add advanced parameters:
1. Select Local Tuning Parameters.
2. Select the Advanced Parameters tab.
3. Click Add.
4. Complete the settings as indicated in the following table.
5. Click OK.
6. Save your changes.
Working with
advanced
parameters
To edit, copy, or remove advanced parameters:
1. Select Local Tuning Parameters.
2. Select the Advanced Parameters tab, and then do one of the following:
3. Save your changes.
Setting Description
Enabled Select this check box to enable the parameter.
Name Type a name for the parameter.
Example: engine.log.file
Comment Type a unique description for the parameter.
Example: The engine log file.
Value Select one of the following options:
• Boolean. Select a value of True or False.
• Number. Enter the appropriate number for the parameter.
• String. Type the value for the parameter, such a log file location.
Example: /var/iss/engine#.log
If you want to... Then...
Edit Tip: You can edit some properties directly on the Advanced
Parameters tab by double-clicking the item you want to
configure.
1. Select the parameter, and then click the Edit icon.
2. Select or clear the Enabled check box.
3. Edit the parameter, and then click OK.
Copy
1. Select the parameter, and then click the Copy icon.
2. Click the Paste icon.
3. Edit the parameter as needed, and then click OK.
Remove 1. Select the parameter.
2. Click the Remove icon.