Tivoli Netcool®/Proviso® 4.3-X Document Revision R2E1 Adva Optical Metro Ethernet 2.1.1.
Notices This information was developed for products and services offered in the U.S.A. IBM® may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information about the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM’s future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information is for planning purposes only. The information herein is subject to change before the products described become available. This information contains examples of data and reports used in daily business operations.
Contents Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . .
Ethernet Port Latency Probe Loss Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Ethernet Port Latency Probe Sequence Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Ethernet Port Latency Probe Summary Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Ethernet Port Latency Probe Summary Resource. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEEsa_ProbePacketInterval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 MEEsa_ProbePackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MEEsa_ProbePacketSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 MEEsa_ProbePortId . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5: Sub-Element Grouping Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 NOC Reporting Grouping Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Sub-Element Collect Grouping Rules . . . . . . . . . . . . . . . . . . . . .
Egress Oneway Delay Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Egress Oneway Delay Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Egress Oneway Delay Sum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Egress Packets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ingress Positive Jitter Variance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Ingress Sync Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Ingress Tail Drop (Frames). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Ingress Throughput (bps). . . . . . . . . . . . . . . . . . . . . .
Preface This manual describes the Netcool/Proviso Adva Optical Metro Ethernet Technology Pack, focusing on the Adva Optical Metro Ethernet environment. Specifically, the manual describes the reports for displaying information about the devices and technologies that operate in the Adva Optical Metro Ethernet environment.
Preface Describes the properties that the Adva Optical Metro Ethernet Technology Pack discovers during the inventory process. • Chapter 5, Sub-Element Grouping Rules Describes the sub-element collection grouping rules and the NOC reporting grouping rules that the Adva Optical Metro Ethernet Technology Pack defines. • Chapter 6, Defined Resources Provides information about the elements and sub-elements that the Adva Optical Metro Ethernet Technology Pack defines in the Proviso database.
Preface Figure 1: Netcool/Proviso Modules DataLoad collects network data. DataChannel computes aggregations and stores data in DataMart. DataMart provides data management and applications. DataView produces and manages reports.
Preface xiv Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 1: Introduction This chapter discusses the following topics: Topic Page Overview 1 How is the Data Collected? 1 How is the Data Processed and Loaded into the Database? 2 How is the Data Reported? 3 Overview Netcool/Proviso Technology Packs are individually installed modules that contain discovery, grouping, collection, and reporting instructions created by Technology Pack developers or Professional Services personnel for a specific network technology or network equipment provider, such as
Chapter 1: Introduction Technology Pack. The grouping rules use the properties and values defined within inventory formulas or adaptor design files to filter the sub-elements into their appropriate collection or reporting groups. • For non-SNMP network resources, a Technology Pack provides a Bulk Adaptor Design File. Bulk Adaptor Design Files define how data fields that reside in files generated by network resources are used to create subelements and set values for items defined as properties.
Chapter 1: Introduction CME Operation The CME is designed to work with data that is gathered over the space of one hour. Within that hour, there are several distinct phases that characterize the operation of the CME: • Loading Phase • Building Phase • Processing Phase • Output Phase Loading Phase During the beginning of each hour, the CME creates a new network configuration model based on the inventory structure that exists in the database at that time.
Chapter 1: Introduction A Technology Pack reporter set is a related group of reports that provide performance information on a specific set of devices or resources that exist in a network. Each report consists of a series of queries that retrieve related sub-elements and their corresponding metrics from the database using the RIDs and MIDs assigned during the inventory and collection processes.
Chapter 2: Supported Reports This chapter discusses the following topics: Topic Page Overview 5 Report Reference 5 Reporter Sets 6 Overview The Adva Optical Metro Ethernet Technology Pack supplies a set of reports suitable for displaying information about the devices and activity associated with the Adva Optical Metro Ethernet environment. Reports contain metrics that are generated by the formulas that this technology pack provides.
Chapter 2: Supported Reports In cases where the stylesheet information is not available for a given report, only the number of tables or charts actually implemented is shown. • Metrics Used in Reports. The collection formulas that provide metrics for the report. • Navigation Path. The navigation path to use to select the report on the DataView portal. Some reports are not accessed directly from a DataView portal navigation path. You can access such reports by drilling down from another report.
Chapter 2: Supported Reports Reports This technology pack provides the following reports: Ethernet Port Drops and Discards Details Ethernet Port Drops and Discards Summary Group Ethernet Port Drops and Discards Summary Resource Ethernet Port Jitter Probe Egress Negative Details Ethernet Port Jitter Probe Egress Positive Details Ethernet Port Jitter Probe Ingress Negative Details Ethernet Port Jitter Probe Ingress Positive Details Ethernet Port Jitter Probe Summary Group Ethernet Port Jitter Probe Summary R
Chapter 2: Supported Reports Ethernet Port Drops and Discards Details Description AP Adva Optical Metro Ethernet - Per UNI Port QoS (DE Dropped) - Detail Chart Reporter Set UNI Tables and Charts Charts: Resource Time Series Chart (8 of 8 implemented) - Real-Time support Metrics Used in Report Egress DE Dropped Frames Egress DE Frames Egress Discarded Frames Egress Tail Drop (Frames) Ingress DE Dropped Frames Ingress DE Frames Ingress Discarded Frames Ingress Tail Drop (Frames) Navigation Path This repo
Chapter 2: Supported Reports Ethernet Port Drops and Discards Summary Group Description AP Adva Optical Metro Ethernet - Per UNI Port QoS Summary - GST Reporter Set UNI Tables and Charts Tables: Group Summary Table (2 of 2 implemented) Charts: Resource Distribution Chart (0 of 4 implemented) Metrics Used in Report Egress DE Dropped Frames Egress DE Frames Egress Discarded Frames Egress Tail Drop (Frames) Ingress DE Dropped Frames Ingress DE Frames Ingress Discarded Frames Ingress Tail Drop (Frames) Nav
Chapter 2: Supported Reports Ethernet Port Drops and Discards Summary Resource Description AP Adva Optical Metro Ethernet - Per UNI Port QoS (DE Frames) Summary - RST1 Reporter Set UNI Tables and Charts Tables: Resource Summary Table (2 of 1 implemented) Charts: Resource Distribution Chart (0 of 2 implemented) Metrics Used in Report Egress DE Dropped Frames Egress DE Frames Egress Discarded Frames Egress Tail Drop (Frames) Ingress DE Dropped Frames Ingress DE Frames Ingress Discarded Frames Ingress Tail
Chapter 2: Supported Reports Ethernet Port Jitter Probe Egress Negative Details Description AP Adva Optical Metro Ethernet - Port Jitter Probe Egress Negative - Detail Chart.
Chapter 2: Supported Reports Ethernet Port Jitter Probe Egress Positive Details Description AP Adva Optical Metro Ethernet - Port Jitter Probe Egress Positive - Detail Chart.
Chapter 2: Supported Reports Ethernet Port Jitter Probe Ingress Negative Details Description AP Adva Optical Metro Ethernet - Port Jitter Probe Ingress Negative - Detail Chart.
Chapter 2: Supported Reports Ethernet Port Jitter Probe Ingress Positive Details Description AP Adva Optical Metro Ethernet - Port Jitter Probe Ingress Positive - Detail Chart.
Chapter 2: Supported Reports Ethernet Port Jitter Probe Summary Group Description AP Adva Optical Metro Ethernet - Port Jitter Probe Summary - GST.
Chapter 2: Supported Reports NOC Reporting > Adva Optical Metro Ethernet > ESA Probes Drills Down To Ethernet Port Jitter Probe Summary Resource Drilled Down From None. 16 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Jitter Probe Summary Resource Description AP Adva Optical Metro Ethernet - Port Jitter Probe Summary - RST.
Chapter 2: Supported Reports NOC Reporting > Adva Optical Metro Ethernet > ESA Probes > %(Element.NAME) Drills Down To Ethernet Port Jitter Probe Egress Negative Details Ethernet Port Jitter Probe Egress Positive Details Ethernet Port Jitter Probe Ingress Negative Details Ethernet Port Jitter Probe Ingress Positive Details Drilled Down From Ethernet Port Jitter Probe Summary Group 18 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Egress Oneway Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Egress Oneway Delay - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (5 of 9 implemented) - Real-Time support Metrics Used in Report Egress Delay Variance Egress Oneway Delay Average Egress Oneway Delay Maximum Egress Oneway Delay Minimum Egress Oneway Delay Sum Navigation Path This report is not deployed on the po
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Ingress Oneway Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Ingress Oneway Delay - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (5 of 9 implemented) - Real-Time support Metrics Used in Report Ingress Delay Variance Ingress Oneway Delay Average Ingress Oneway Delay Maximum Ingress Oneway Delay Minimum Ingress Oneway Delay Sum Navigation Path This report is not deployed on
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Round Trip Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Round Trip Delay - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (5 of 9 implemented) - Real-Time support Metrics Used in Report Round Trip Delay Average Round Trip Delay Maximum Round Trip Delay Minimum Round Trip Delay Sum Round Trip Delay Variance Navigation Path This report is not deployed on the portal navigatio
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Summary Group Description AP Adva Optical Metro Ethernet - Port Latency Probe Delay Summary - GST Reporter Set ESA Probe Tables and Charts Tables: GroupSummary (3 implemented) Metrics Used in Report Egress Delay Variance Egress Oneway Delay Average Egress Oneway Delay Maximum Egress Oneway Delay Minimum Egress Oneway Delay Sum Ingress Delay Variance Ingress Oneway Delay Average Ingress Oneway Delay Maximum Ingress Oneway Delay Minimum Ingres
Chapter 2: Supported Reports Drilled Down From None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Summary Resource Description AP Adva Optical Metro Ethernet - Port Latency Probe Delay Summary - RST Reporter Set ESA Probe Tables and Charts Tables: ResSummary (3 implemented) Metrics Used in Report Egress Delay Variance Egress Oneway Delay Average Egress Oneway Delay Maximum Egress Oneway Delay Minimum Egress Oneway Delay Sum Ingress Delay Variance Ingress Oneway Delay Average Ingress Oneway Delay Maximum Ingress Oneway Delay Minimum Ingre
Chapter 2: Supported Reports Ethernet Port Latency Probe Delay Round Trip Details Drilled Down From Ethernet Port Latency Probe Delay Summary Group Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Latency Probe Error Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Error - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (4 of 8 implemented) - Real-Time support Metrics Used in Report Egress Erred Packets Egress Sync Errors Ingress Erred Packets Ingress Sync Errors Navigation Path This report is not deployed on the portal navigation path during the initial configuration of the technology pack
Chapter 2: Supported Reports Ethernet Port Latency Probe Loss Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Loss - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (6 of 8 implemented) - Real-Time support Metrics Used in Report Egress Loss Percentage Egress Lost Packets Egress Packets Ingress Loss Percentage Ingress Lost Packets Ingress Packets Navigation Path This report is not deployed on the portal navigation path during the initial c
Chapter 2: Supported Reports Ethernet Port Latency Probe Sequence Details Description AP Adva Optical Metro Ethernet - Port Latency Probe Sequence - Detail Chart Reporter Set ESA Probe Tables and Charts Charts: Resource Time Series Chart (4 of 8 implemented) - Real-Time support Metrics Used in Report Late Packets Lost Packets Out of Sequence Errors Sequence Gaps Navigation Path This report is not deployed on the portal navigation path during the initial configuration of the technology pack.
Chapter 2: Supported Reports Ethernet Port Latency Probe Summary Group Description AP Adva Optical Metro Ethernet - Port Latency Probe Summary - GST Reporter Set ESA Probe Tables and Charts Tables: GroupSummary (3 implemented) Metrics Used in Report Egress Erred Packets Egress Loss Percentage Egress Lost Packets Egress Packets Egress Sync Errors Ingress Erred Packets Ingress Loss Percentage Ingress Lost Packets Ingress Packets Ingress Sync Errors Late Packets Lost Packets Out of Sequence Errors Sequence
Chapter 2: Supported Reports Drilled Down From None. 30 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Latency Probe Summary Resource Description AP Adva Optical Metro Ethernet - Port Latency Probe Summary - RST Reporter Set ESA Probe Tables and Charts Tables: ResSummary (3 implemented) Metrics Used in Report Egress Erred Packets Egress Loss Percentage Egress Lost Packets Egress Packets Egress Sync Errors Ingress Erred Packets Ingress Loss Percentage Ingress Lost Packets Ingress Packets Ingress Sync Errors Late Packets Lost Packets Out of Sequence Errors Sequenc
Chapter 2: Supported Reports Drilled Down From Ethernet Port Latency Probe Summary Group 32 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 2: Supported Reports Ethernet Port Optical Environment Details Description AP Adva Optical Metro Ethernet - Per UNI Port Optical Environment - Detail Chart Reporter Set UNI Tables and Charts Charts: Resource Time Series Chart (3 of 9 implemented) - Real-Time support Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path This report is not deployed on the portal navigation path during the initial configuration of the technology pack.
Chapter 2: Supported Reports Ethernet Port Optical Environment Summary Group Description AP Adva Optical Metro Ethernet - Per UNI Port Optical Environment - GST Reporter Set UNI Tables and Charts Tables: Group Summary Table (1 of 2 implemented) Charts: Resource Distribution Chart (0 of 4 implemented) Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro Ethernet > Ethernet Port Drills Down T
Chapter 2: Supported Reports Ethernet Port Optical Environment Summary Resource Description AP Adva Optical Metro Ethernet - Per UNI Port Optical Environment Reporter Set UNI Tables and Charts Tables: Resource Summary Table (1 of 1 implemented) Charts: Resource Distribution Chart (0 of 2 implemented) Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro Ethernet > Ethernet Port > %(Element.
Chapter 2: Supported Reports Ethernet Port Throughput Details Description AP Adva Optical Metro Ethernet - Per UNI Port Throughput - Detail Chart Reporter Set UNI Tables and Charts Charts: Resource Time Series Chart (6 of 8 implemented) - Real-Time support Metrics Used in Report Egress Broadcast Frames Egress Frames Egress Multicast Frames Egress Throughput (bps) Egress Unicast Frames Ingress Throughput (bps) Navigation Path This report is not deployed on the portal navigation path during the initial c
Chapter 2: Supported Reports Ethernet Port Throughput Summary Group Description AP Adva Optical Metro Ethernet - Port Throughput Summary - GST Reporter Set UNI Tables and Charts Tables: Group Summary Table (1 of 2 implemented) Charts: Resource Distribution Chart (0 of 4 implemented) Metrics Used in Report Egress Broadcast Frames Egress Frames Egress Multicast Frames Egress Throughput (bps) Egress Unicast Frames Ingress Throughput (bps) Navigation Path Navigation path on the DataView portal: NOC Reporti
Chapter 2: Supported Reports Ethernet Port Throughput Summary Resource Description AP Adva Optical Metro Ethernet - Per UNI Port Throughput Summary Reporter Set UNI Tables and Charts Tables: Resource Summary Table (1 of 1 implemented) Charts: Resource Distribution Chart (0 of 2 implemented) Metrics Used in Report Egress Broadcast Frames Egress Frames Egress Multicast Frames Egress Throughput (bps) Egress Unicast Frames Ingress Throughput (bps) Navigation Path Navigation path on the DataView portal: NOC
Chapter 2: Supported Reports Metro Ethernet Overview Description AP Adva Optical Metro Ethernet - Dashboard Reporter Set Metro Ethernet Dashboard Tables and Charts Tables: TopN (5 of 9 implemented) Charts: TopN (5 of 9 implemented) Metrics Used in Report Egress Loss Percentage Egress Throughput (bps) Ingress Loss Percentage Ingress Throughput (bps) Round Trip Delay Average Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro Ethernet Drills Down To Ethernet Port L
Chapter 2: Supported Reports WAN Uplink Optical Environment Details Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Optical Environment Stats - Detail Chart Reporter Set WAN Tables and Charts Charts: Resource Time Series Chart (3 of 9 implemented) - Real-Time support Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path This report is not deployed on the portal navigation path during the initial configuration of the technology pack.
Chapter 2: Supported Reports WAN Uplink Optical Environment Summary Group Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Optical Environment Stats - GST Reporter Set WAN Tables and Charts Tables: Group Summary Table (1 of 2 implemented) Charts: Resource Distribution Chart (0 of 4 implemented) Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro Ethernet > WAN Port Drills Down T
Chapter 2: Supported Reports WAN Uplink Optical Environment Summary Resource Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Optical Environment Stats - RST Reporter Set WAN Tables and Charts Tables: Resource Summary Table (1 of 1 implemented) Charts: Resource Distribution Chart (0 of 2 implemented) Metrics Used in Report Laser Bias Current Received Power Transmitted Power Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro Ethernet > WAN Port > %(Elem
Chapter 2: Supported Reports WAN Uplink Port Throughput Details Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Traffic (PB enabled) - Detail Chart Reporter Set WAN Tables and Charts Charts: Resource Time Series Chart (6 of 8 implemented) - Real-Time support Metrics Used in Report Egress Bitrate Egress Broadcast Egress Bytes Egress Multicast Egress Unicast Ingress Bitrate Navigation Path This report is not deployed on the portal navigation path during the initial configuration of the techno
Chapter 2: Supported Reports WAN Uplink Port Throughput Summary Group Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Throughput (PB enabled) - GST Reporter Set WAN Tables and Charts Tables: Group Summary Table (1 of 2 implemented) Charts: Resource Distribution Chart (0 of 4 implemented) Metrics Used in Report Egress Bitrate Egress Broadcast Egress Bytes Egress Multicast Egress Unicast Ingress Bitrate Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical Metro
Chapter 2: Supported Reports WAN Uplink Port Throughput Summary Resource Description AP Adva Optical Metro Ethernet - Uplink (Gig-E) Traffic (PB enabled) Summary Reporter Set WAN Tables and Charts Tables: Resource Summary Table (1 of 1 implemented) Charts: Resource Distribution Chart (0 of 2 implemented) Metrics Used in Report Egress Bitrate Egress Broadcast Egress Bytes Egress Multicast Egress Unicast Ingress Bitrate Navigation Path Navigation path on the DataView portal: NOC Reporting > Adva Optical
Chapter 2: Supported Reports NOTES 46 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 3: Devices and Services This chapter discusses the following topics: Topic Page Overview 47 Summary of Device Technology 47 Supported MIBs 48 Overview This chapter provides a summary of the Adva Optical Metro Ethernet device technology and the associated Management Information Bases (MIBs), which the Adva Optical Metro Ethernet Technology Pack is designed to support. Note: The Adva Optical Metro Ethernet Technology Pack operates with Adva Optical Metro Ethernet devices running Version 3.4.
Chapter 3: Devices and Services Supported MIBs The Adva Optical Metro Ethernet Technology Pack uses the following MIBs for inventory and data collection: 48 • ethernetServices.my • ethernetServicesPB.my • covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 3: Devices and Services NOTES Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 3: Devices and Services 50 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties This chapter discusses the following topics: Topic Page Overview 51 Adva Optical Metro Ethernet Device Element Properties 51 Adva Optical Metro Ethernet Device Sub-Element Properties 52 Overview A Netcool/Proviso property is an attribute or characteristic of an element or sub-element.
Chapter 4: Element and Sub-Element Properties Element Property Description sysDescr A string that identifies the manufacturer of or some other information about the network device to which the SNMP Agent element maps. For example, "Cisco Systems ws-C5000". sysName A string that identifies the name of the computer or server to which the SNMP Agent element maps. For example, "MIMC_Agent#2 Server MIMIC2".
Chapter 4: Element and Sub-Element Properties Element.NAME Description The Name of the Element. Captured in Discovery Formulas None. Used in CME Formulas None. Used in Reports None. Used in Grouping Rules NOC Reporting Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties Element.STATE Description This property indicates if an element is active or not. The value should be ON for collection and discovery to occur. Captured in Discovery Formulas None. Used in CME Formulas None. Used in Reports None. Used in Grouping Rules NOC Reporting Sub-Element Collect 54 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties EsaProbeHistoryIndex Description An arbitrary integer index value used to uniquely identify this ESA Probe History entry. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties EsaProbeId Description A unique identifier to distinguish the ESA Probe. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 56 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties LanPort Description An integer index value used to uniquely identify this Ethernet Services interface within the ethernetPBPortSvcTable. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties LanPortHistoryIndex Description An arbitrary integer index value used to uniquely identify the Ethernet Services history statistics entry. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 58 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties LanPortStatsIndex Description An arbitrary integer index vlaue used to uniquely identify the Ethernet Services statistics entry. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MECustomerName Description The name of the customer. Captured in Discovery Formulas LanPort WanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 60 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_DestinationIP Description A variable that specifies the Reflector’s destination IP Address. This IP Address is used in the IP header of the ESA Probe generated packets as the destination address. Captured in Discovery Formulas ESAProbes Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbePacketInterval Description Specifies the interval (in milliseconds) between packet generation. A non-zero value must be specified. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 62 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbePackets Description Specifies the number of packets within a sample run for ESA traffic generation. A non-zero value must be specified. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbePacketSize Description Specifies the fixed-length frame size (in bytes) for ESA traffic generation. A default value of 64 bytes is used unless otherwise specified. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 64 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbePortId Description This object has the same value as ifIndex for Ethernet Port, on which the service to be monitored resides. Captured in Discovery Formulas ESAProbes Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbePriority Description Specifies the Priority Value for esaProbePrioMapMode as TOS/DSCP. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 66 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_ProbeStorageType Description The type of storage configured for this entry. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_Protocol Description Protocol used in ESA Probe messages. Note that an udpEcho protocol can be used for standard ESA - in other words the reflector can be any node running the UDP Echo service (in this case only round-trip delay time metrics are available). The icmpTimestamp protocol can be used for enhanced ESA (in this case the reflector must be a Covaro node). Round-trip delay time as well as one-way-jitter metrics are available with this enhanced ESA.
Chapter 4: Element and Sub-Element Properties MEEsa_ServiceType Description Specifies whether or not to use VLAN tagged or untagged ESA traffic generation on the Probe. Captured in Discovery Formulas ESAProbes Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MEEsa_SourceIP Description Specifies the Probe’s source IP Address. This IP Address is used as the source address in the IP header of the ESA Probe generated packets. Captured in Discovery Formulas ESAProbes Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MEEsa_VlanId Description Specifies the monitored service’s VLAN tag. It is valid if esaProbeSvcType is specified as VLAN tagged. Captured in Discovery Formulas ESAProbes Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEEsa_VlanPriority Description Specifies the monitored service’s VLAN priority. It is valid if esaProbeSvcType is specified as VLAN tagged. Captured in Discovery Formulas ESAProbes Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MESiteName Description The Name of the Site. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_CBS Description This object allows configuration of the Commited Burst Size (CBS) on the Ethernet port. It is only applicable in connection-oriented TLS mode. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports Ethernet Port Drops and Discards Details Ethernet Port Throughput Details Used in Grouping Rules None. 74 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_CIR Description Enables configuration of the Commited Information Rate(CIR) on the Ethernet port. This object is only applicable in connection-oriented TLS mode. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports Ethernet Port Drops and Discards Details Ethernet Port Throughput Details Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_EBS Description This object allows SNMP management entities to set the Excess Burst Size (EBS) of the Ethernet Service Port, when the port is in connection-oriented TLS mode. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports Ethernet Port Drops and Discards Details Ethernet Port Throughput Details Used in Grouping Rules None. 76 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties MEUNI_EgressCBS Description This object allows configuration of the Egress Commited Burst Size (CBS) on Ethernet port. It is only applicable in connection-oriented TLS mode and is valid only if ethernetPBPortSvcEgressRateLimitingEnabled is TRUE. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_EgressCIR Description This object is applicable only for connection-oriented TLS mode.It allows for configuration of the Egress Commited Information Rate (CIR) on Ethernet port. It is valid only if ethernetPBPortSvcEgressRateLimitingEnabled is TRUE. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 78 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties MEUNI_EgressEBS Description This object allows SNMP management entities to set the Excess Burst Size (EBS) of the Ethernet Service Port, when the port is in connection-oriented TLS mode. This object is valid only if ethernetPBPortSvcEgressRateLimitingEnabled is TRUE. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties MEUNI_EgressEIR Description This object is applicable only for connection-oriented TLS mode. It allows for configuration of the Egress Peak Information Rate(EIR) on Ethernet port. It is valid only if ethernetPBPortSvcEgressRateLimitingEnabled is TRUE. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 80 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties MEUNI_EIR Description This object allows SNMP management entities to set the Excess Information Rate (EIR) of the Ethernet Service Port, when the port is in connection-oriented TLS mode. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports Ethernet Port Drops and Discards Details Ethernet Port Throughput Details Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties MEUNI_InterfaceType Description Specifies a transparent (TLS) service or VLAN/priority classified service (TVLS). This object is only applicable when ethernetPBPortSvcPortMode is connection-oriented. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports Ethernet Port Drops and Discards Details Ethernet Port Optical Environment Details Ethernet Port Throughput Details Used in Grouping Rules None.
Chapter 4: Element and Sub-Element Properties MEUNI_PortID Description An integer index value used to uniquely identify the Ethernet Services interface. This object has the same value as ifIndex for Ethernet Port. Captured in Discovery Formulas LanPort Used in CME Formulas None.
Chapter 4: Element and Sub-Element Properties MEUNI_PortMode Description This object allows SNMP management entities to indicate whether the Ethernet Service Port is connected or not. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 84 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_PortSpeed Description This object allows configuration of the port speed. Speed-auto enables auto-negotiation and advertises all speeds (10M Half Duplex, 10M Full Duplex, 100M Half Duplex, 100M Full Duplex). Speed-auto with specific settings enables auto-negotiation for that specific speed/duplexicity only (for example, speed-auto-10M-half is auto negotiation enabled with advertisement for 10M Half Duplex).
Chapter 4: Element and Sub-Element Properties MEUNI_Priority Description This object specifies the port Priority on the Ethernet port. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 86 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_PrioVID Description This object specifies the Priority VLAN Id on the Ethernet port. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_TaggedFrames Description This object determines whether Port supports Tagged Frames. It is not applicable in connection-less port mode. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 88 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEUNI_VlanId Description This object is only applicable for a connection-oriented, TVLS service. It specifies the port VLAN Id on Ethernet port. Captured in Discovery Formulas LanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEVendorName Description The Name of the Vendor. Captured in Discovery Formulas LanPort WanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 90 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEWAN_InterfaceType Description Specifies the Type of Ethernet Media. Captured in Discovery Formulas WanPort Used in CME Formulas None. Used in Reports WAN Uplink Optical Environment Details WAN Uplink Port Throughput Details Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties MEWAN_PortId Description This object has the same value as ifIndex for Ethernet WAN Port. An integer index value used to uniquely identify this Ethernet WAN interface. Captured in Discovery Formulas WanPort Used in CME Formulas None. Used in Reports WAN Uplink Optical Environment Details WAN Uplink Port Throughput Details Used in Grouping Rules NOC Reporting Sub-Element Collect 92 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 4: Element and Sub-Element Properties STATE Description Indicates whether the entry is active. Captured in Discovery Formulas None. Used in CME Formulas None. Used in Reports None. Used in Grouping Rules NOC Reporting Sub-Element Collect Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties WanPort Description An integer index value used to uniquely identify an Ethernet WAN interface. Captured in Discovery Formulas WanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 94 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties WanPortHistoryIndex Description An arbitrary integer index value used to uniquely identify the Ethernet WAN statistics history entry. Captured in Discovery Formulas WanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties WanPortStatsIndex Description An arbitrary integer index value used to uniquely identify the Ethernet WAN statistics entry. Captured in Discovery Formulas WanPort Used in CME Formulas None. Used in Reports None. Used in Grouping Rules None. 96 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties NOTES Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 4: Element and Sub-Element Properties 98 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 5: Sub-Element Grouping Rules This chapter discusses the following topics: Topic Page Overview 99 NOC Reporting Grouping Rules 99 Sub-Element Collect Grouping Rules 100 Overview Typically, a Netcool/Proviso Technology Pack defines sub-element grouping rules. Grouping rules organize and filter networking data into a structure that makes it easier to collect data on thousands or millions of resources. Sub-element grouping rules organize data in tree structures.
Chapter 5: Sub-Element Grouping Rules The branches are described as follows: Branch Name Description Adva Optical Metro Ethernet Type: Static. Purpose: Organization only (contains all Adva Optical Metro Ethernet sub-elements). WAN Port Type: Rule. Purpose: Filter by condition. [%(MEWAN_PortID) IS NOT NULL] Ethernet Port Type: Rule. Purpose: Filter by condition. [%(MEUNI_PortID) IS NOT NULL] ESA Probes Type: Rule. Purpose: Filter by condition. [%(MEEsa_ProbePortId) IS NOT NULL] %(Element.
Chapter 5: Sub-Element Grouping Rules Branch Name Description WAN Type: Rule. Purpose: Filters by condition: [%(MEWAN_PortId) IS NOT NULL] Contains Adva Optical Metro Ethernet WAN sub-elements. UNI Type: Rule. Purpose: Filters by condition: [%(MEUNI_PortID) IS NOT NULL] Contains Adva Optical Metro Ethernet UNI sub-elements. ESA Probes Type: Rule. Purpose: Filters by condition: [%(MEEsa_ProbePortId) IS NOT NULL] Contains Adva Optical Metro Ethernet ESA Probes sub-elements.
Chapter 5: Sub-Element Grouping Rules 102 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 6: Defined Resources This chapter discusses the following topics: Topic Page Overview 103 Adva Optical Metro Ethernet Technology Pack Resources 103 Sub-Element Types 104 Overview A Netcool/Proviso resource is a network element or sub-element, such as a router or a hub. Typically, an IBM Technology Pack defines a set of Netcool/Proviso elements, sub-elements, and properties that map to specific devices and services operating in a network.
Chapter 6: Defined Resources Resource Description Sub-element An element has one or more sub-elements for statistics that apply to the Adva Optical Metro Ethernet technology. The sub-element name identifies a sub-element that resides in the database. Sub-element names are often used in reports to identify specific entities. The sub-element name is constructed from the element name plus the instance name. Example: hqccm.canalst.dev.mycorp.
Chapter 6: Defined Resources — References to element names, instance names, and other variables are presented in italic type (for example, ElementName_. • The Properties row lists the Adva Optical Metro Ethernet Technology Pack properties associated with the particular sub-element type. For descriptions of the properties, see the chapter on element and sub-element properties.
Chapter 6: Defined Resources Latency and Jitter Probes per COS-VLAN-Port (UNI-N) Family Naming Structure Properties Comments Adva Sub-element name: ElementName_EsaProbeIdEsaProbeHistoryIndex Instance name: EsaProbeIdEsaProbeHistoryIndex Label: EsaProbeId: EsaProbeId EsaProbeId EsaProbeHistoryIndex ElementName is the name of the element. EsaProbeId is an unique identifier to distinguish the ESA Probe.
Chapter 6: Defined Resources NOTES Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 6: Defined Resources 108 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 7: SNMP Collection Formulas This chapter discusses the following topics: Topic Page Overview 109 Data Collection 109 Formulas and Metrics 109 Formula Reference 110 Overview The Adva Optical Metro Ethernet Technology Pack provides SNMP collection formulas specific to the associated network devices and technologies on which it operates. These SNMP collection formulas are installed with the Adva Optical Metro Ethernet Technology Pack.
Chapter 7: SNMP Collection Formulas Note: Generic and CME formulas may not be included in this technology pack. Metrics may appear in DataView reports as raw data, or they may be further processed by the Complex Metric Engine — for example, to produce data aggregations over time. To learn where the metrics generated by the formulas in this chapter are used, see the chapter on supported reports in this guide.
Chapter 7: SNMP Collection Formulas Egress Bitrate Type SNMP (collection) Description The average bit rate transmitted over a specific interval in the egress direction, based on Bytes Sent. If there is link down during the interval, the bin is not accessible. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryABRTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress Broadcast Frames Type SNMP (collection) Description The Broadcast Frames Sent in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryBFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Egress Broadcast Type SNMP (collection) Description The Broadcast Frames Sent in the egress direction. If there is link down during the interval, the bin is not accessible. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryBFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Egress Bytes Type SNMP (collection) Description The Bytes Sent in the egress direction. If there is link down during the interval, the bin is not accessible. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryBSTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Egress DE Dropped Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Yello and Discarded in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMYDTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress DE Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Yello in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMYTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress Delay Variance Type SNMP (collection) Description Transmitted packets in Variance of one way delay from source to destination in history interval. Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqOnewayP2RDelay.%I1.%I2 (esaProbeHistorySumOnewayP2RDelay.%I1.%I2 * esaProbeHistorySumOnewayP2RDelay.%I1.%I2))/distrib((esaProbeHistoryP2RPkts.%I1.
Chapter 7: SNMP Collection Formulas Egress Discarded Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Red and Discarded in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMRDTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress Erred Packets Type SNMP (collection) Description The total number of Packets in the history interval, for which there was a problem in transmission. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryP2RErredPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Frames Type SNMP (collection) Description The average bit rate transmitted over a specific interval in the egress direction, based on EtherStats Octets. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryUFTx.%I1.%I2.%I3 + ethernetPBPortSvcHistoryMFTx.%I1.%I2.%I3 + ethernetPBPortSvcHistoryBFTx.%I1.%I2.
Chapter 7: SNMP Collection Formulas Egress Loss Percentage Type SNMP (collection) Description The number of Lost Pkts in percentage from probe to reflector in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; 100 * esaProbeHistoryP2RLostPkts.%I1.%I2 / distrib(esaProbeHistoryP2RPkts.%I1.%I2, ">0:*"); Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Egress Lost Packets Type SNMP (collection) Description The number of Lost Pkts from probe to reflector in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryP2RLostPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 122 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Multicast Frames Type SNMP (collection) Description The Multicast Frames Sent in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryMFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Egress Multicast Type SNMP (collection) Description The Multicast Frames Sent in the egress direction. If there is link down during the interval, the bin is not accessible. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryMFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Egress Negative Jitter Maximum Type SNMP (collection) Description The maximum negative one-way jitter from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxNegP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Negative Jitter Minimum Type SNMP (collection) Description The minimum negative one-way jitter from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinNegP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 126 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Negative Jitter Number Type SNMP (collection) Description The total number of negative one-way jitters from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryNumNegP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Negative Jitter Sum Type SNMP (collection) Description The total sum of negative one-way jitters from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumNegP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 128 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Negative Jitter Variance Type SNMP (collection) Description Transmitted packets in Variance of negative one-way jitters from source to destination in the history interval. Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqNegP2RJitter.%I1.%I2 (esaProbeHistorySumNegP2RJitter.%I1.%I2 * esaProbeHistorySumNegP2RJitter.%I1.%I2))/distrib((esaProbeHistoryR2PPkts.%I1.
Chapter 7: SNMP Collection Formulas Egress Oneway Delay Average Type SNMP (collection) Description The average one-way source to destination delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryAvgOnewayP2RDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Egress Oneway Delay Maximum Type SNMP (collection) Description The maximum one-way source to destination delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxOnewayP2RDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Egress Oneway Delay Minimum Type SNMP (collection) Description The minimum one-way source to destination delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinOnewayP2RDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Egress Oneway Delay Sum Type SNMP (collection) Description The sum total of one-way delay from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumOnewayP2RDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Packets Type SNMP (collection) Description The total number of Transmitted Packets in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryP2RPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 134 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 7: SNMP Collection Formulas Egress Positive Jitter Maximum Type SNMP (collection) Description The maximum positive one-way jitter from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxPosP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Positive Jitter Minimum Type SNMP (collection) Description The minimum positive one-way jitter from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinPosP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 136 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Positive Jitter Number Type SNMP (collection) Description The total number of positive one-way jitters from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryNumPosP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Positive Jitter Sum Type SNMP (collection) Description The total sum of positive one-way jitters from source to destination in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumPosP2RJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 138 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Positive Jitter Variance Type SNMP (collection) Description Transmitted packet Variance of positive one-way jitters from source to destination in the history interval. Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqPosP2RJitter.%I1.%I2 (esaProbeHistorySumPosP2RJitter.%I1.%I2 * esaProbeHistorySumPosP2RJitter.%I1.%I2))/distrib((esaProbeHistoryR2PPkts.%I1.
Chapter 7: SNMP Collection Formulas Egress Sync Errors Type SNMP (collection) Description The number of Synchronization Errors from probe to reflector in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryP2RSyncErrs.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 140 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Egress Tail Drop (Frames) Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The Frames Tail Dropped in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFTDTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress Throughput (bps) Type SNMP (collection) Description The average bit rate transmitted over a specific interval in the egress direction, based on EtherStats Octets. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryABRTx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Egress Unicast Frames Type SNMP (collection) Description The Unicast Frames Sent in the egress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryUFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.
Chapter 7: SNMP Collection Formulas Egress Unicast Type SNMP (collection) Description The Unicast Frames Sent in the egress direction If there is link down during the interval, the bin is not accessible. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryUFTx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Ingress Bitrate Type SNMP (collection) Description The average bit rate received over the specific interval in the ingress direction. If there is link down during the interval, the bin is not accessible. This counter is valid for all modes of the ethernet interface. In case of transparent In case of transparent ethernet service, this counter is based on RMON etherStatsOctets.
Chapter 7: SNMP Collection Formulas Ingress DE Dropped Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Yello and Discarded in the ingress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMYDRx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Ingress DE Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Yello in the ingress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMYRx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Ingress Delay Variance Type SNMP (collection) Description Received packets in Variance of one-way delay from destination to source in the history interval Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqOnewayR2PDelay.%I1.%I2 (esaProbeHistorySumOnewayR2PDelay.%I1.%I2 * esaProbeHistorySumOnewayR2PDelay.%I1.%I2))/distrib((esaProbeHistoryR2PPkts.%I1.
Chapter 7: SNMP Collection Formulas Ingress Discarded Frames Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Marked Red and Discarded in the ingress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFMRDRx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Ingress Erred Packets Type SNMP (collection) Description The total number of Received Packets in the history interval, which had protocol errors or timestamp synchronization problems. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryR2PErredPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Ingress Loss Percentage Type SNMP (collection) Description The number of Lost Pkts (as a percentage) from reflector to probe in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; 100 * esaProbeHistoryR2PLostPkts.%I1.%I2 / distrib(esaProbeHistoryR2PPkts.%I1.%I2, ">0:*"); Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Ingress Lost Packets Type SNMP (collection) Description The number of Lost Pkts from reflector to probe in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryR2PLostPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 152 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Negative Jitter Maximum Type SNMP (collection) Description The maximum negative one-way jitter from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxNegR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Negative Jitter Minimum Type SNMP (collection) Description The minimum negative one-way jitter from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinNegR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 154 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Negative Jitter Number Type SNMP (collection) Description The total number of negative one-way jitters from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryNumNegR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Negative Jitter Sum Type SNMP (collection) Description The total sum of negative one-way jitters from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumNegR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 156 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Negative Jitter Variance Type SNMP (collection) Description Received packets in Variance of negative one-way jitters from destination to source in the history interval. Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqNegR2PJitter.%I1.%I2 (esaProbeHistorySumNegR2PJitter.%I1.%I2 * esaProbeHistorySumNegR2PJitter.%I1.%I2))/distrib((esaProbeHistoryR2PPkts.%I1.
Chapter 7: SNMP Collection Formulas Ingress Oneway Delay Average Type SNMP (collection) Description The average one-way destination to source delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryAvgOnewayR2PDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Ingress Oneway Delay Maximum Type SNMP (collection) Description The maximum one-way destination to source delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxOnewayR2PDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Ingress Oneway Delay Minimum Type SNMP (collection) Description The minimum one-way destination to source delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinOnewayR2PDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.
Chapter 7: SNMP Collection Formulas Ingress Oneway Delay Sum Type SNMP (collection) Description The sum total of one-way delay from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumOnewayR2PDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Packets Type SNMP (collection) Description The total number of Received Packets in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryR2PPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 162 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 7: SNMP Collection Formulas Ingress Positive Jitter Maximum Type SNMP (collection) Description The maximum positive one-way jitter from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxPosR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Positive Jitter Minimum Type SNMP (collection) Description The minimum positive one-way jitter from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinPosR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 164 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Positive Jitter Number Type SNMP (collection) Description The total number of positive one-way jitters from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryNumPosR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Positive Jitter Sum Type SNMP (collection) Description The total sum of positive one-way jitters from destination to source in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumPosR2PJitter.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 166 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Positive Jitter Variance Type SNMP (collection) Description Received packets in variance of positive one-way jitters from destination to source in the history interval. Syntax Dim I1 As DisplayString Default * NAME esaProbeId; Dim I2 As Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqPosR2PJitter.%I1.%I2 (esaProbeHistorySumPosR2PJitter.%I1.%I2 * esaProbeHistorySumPosR2PJitter.%I1.%I2))/distrib((esaProbeHistoryR2PPkts.%I1.
Chapter 7: SNMP Collection Formulas Ingress Sync Errors Type SNMP (collection) Description The number of Synchronization Errors from reflector to probe in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryR2PSyncErrs.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 168 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Ingress Tail Drop (Frames) Type SNMP (collection) Description Only applicable when Port is in Connection-oriented, TLS mode. The number of Frames Tail Dropped (FTD) in the ingress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryFTDRx.%I1.%I2.%I3; Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Ingress Throughput (bps) Type SNMP (collection) Description Average bit rate received over the specific interval in the ingress direction. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryABRRx.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Laser Bias Current Type SNMP (collection) Description Laser Bias Current retrieved from the SFP. Applicable only if the media type is fiber. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryLBC.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Laser Bias Current Type SNMP (collection) Description Laser Bias Current retrieved from the SFP. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryLBC.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.my 172 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Late Packets Type SNMP (collection) Description The total number of Late Arrival Packets in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryLatePkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 7: SNMP Collection Formulas Lost Packets Type SNMP (collection) Description The total number of Lost Packets in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryLostPkts.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 174 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 7: SNMP Collection Formulas Out of Sequence Errors Type SNMP (collection) Description The total number of out of sequence errors across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryOutOfSeqErrs.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Received Power Type SNMP (collection) Description Received Optical Power retrieved from the SFP. Applicable only if the media type is fiber. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryOPR.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Received Power Type SNMP (collection) Description Received Optical Power retrieved from the SFP. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryOPR.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Round Trip Delay Average Type SNMP (collection) Description The average round-trip delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryAvgRoundTripDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 178 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Round Trip Delay Maximum Type SNMP (collection) Description The maximum round-trip delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMaxRoundTripDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Round Trip Delay Minimum Type SNMP (collection) Description The minimum round-trip delay (in milliseconds) across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistoryMinRoundTripDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my 180 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Round Trip Delay Sum Type SNMP (collection) Description The total sum of round trip delay (in milliseconds) in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySumRoundTripDelay.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Round Trip Delay Variance Type SNMP (collection) Description The Variance of the Round Trip Delay in history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; (esaProbeHistorySumOfSqRoundTripDelay.%I1.%I2 (esaProbeHistorySumRoundTripDelay.%I1.%I2 * esaProbeHistorySumRoundTripDelay.%I1.%I2))/distrib((esaProbeHistoryP2RPkts.%I1.% I2 - 1), ">0:*"); Generic Database Alias None.
Chapter 7: SNMP Collection Formulas Sequence Gaps Type SNMP (collection) Description The total number of sequence gaps across all packets received in the history interval. Syntax Dim I1 AS DisplayString Default * NAME esaProbeId; Dim I2 AS Integer Default * NAME esaProbeHistoryIndex; esaProbeHistorySeqGaps.%I1.%I2; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Esa MIB covEsa.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas Transmitted Power Type SNMP (collection) Description Transmit Optical Power retrieved from the SFP. Applicable only if the media type is fiber. Syntax Dim I1 AS Integer Default * NAME PortSvcIndex; Dim I2 AS Integer Default * NAME PortSvcStatsIndex; Dim I3 AS Integer Default * NAME PortSvcHistoryIndex; ethernetPBPortSvcHistoryOPT.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > UNI MIB etherServicesPB.
Chapter 7: SNMP Collection Formulas Transmitted Power Type SNMP (collection) Description Transmit Optical Power retrieved from the SFP. Syntax Dim I1 AS Integer Default * NAME WanIndex; Dim I2 AS Integer Default * NAME WanStatsIndex; Dim I3 AS Integer Default * NAME WanHistoryIndex; ethernetPBWanHistoryOPT.%I1.%I2.%I3; Generic Database Alias None. Formula Editor Path AP > Specific > SNMP > Adva > Port > WAN MIB etherServicesPB.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.
Chapter 7: SNMP Collection Formulas 186 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 8: Discovery Formulas This chapter discusses the following topics: Topic Page Overview 187 Netcool/Proviso Discovery Formula Tree 187 Discovery Formula Structure 187 Overview A discovery formula (also called an inventory formula) allows Netcool/Proviso to recognize resources specific to the target devices and technologies supported in the Adva Optical Metro Ethernet environment so that information can then be collected on those resources.
Chapter 8: Discovery Formulas • Temporary variable definition. Temporary variables hold the result of an SNMP query. These variables can then be used as parameters in subsequent queries. The following line is an example of a temporary variable definition: V01=OIDINST(rttMonCtrlAdminStatus.%I1==1, once); • Results line. The last line in the formula returns the formula result. The results line includes a sub-element instance string and a set of sub-element properties.
Chapter 8: Discovery Formulas ESAProbes Type SNMP (discovery) Description Formula to discover the Ethernet Services Assurance (ESA) Probes Syntax Dim I1 AS DisplayString Default * NAME EsaProbeId; Dim I2 AS Integer Default * NAME EsaProbeHistoryIndex; V01 = OIDVAL(esaProbeSrcIpAddress.%I1); V02 = OIDVAL(esaProbeDestIpAddress.%I1); V03 = OIDVAL(esaProbeProtocol.%I1 format clean); V04 = OIDVAL(esaProbePortIfIndex.%I1); V05 = OIDVAL(esaProbeSvcType.%I1 format clean); V06 = OIDVAL(esaProbeVlanId.
Chapter 8: Discovery Formulas LanPort Type SNMP (discovery) Description Formula to discover the Adva Optical ME FSP 150CCF-825 Ports Syntax Def UseQuotedStrings no; Dim I1 AS Integer Default * NAME LanPortIndex; Dim I2 AS Integer Default * NAME LanPortStatsIndex; Dim I3 AS Integer Default * NAME LanPortHistoryIndex; V01 = OIDVAL(ethernetPBPortSvcCircuitName.%I1 format clean); V02 = OIDVAL(ethernetPBPortSvcIfIndex.%I1); V03 = OIDVAL(ethernetPBPortSvcPortMode.
Chapter 8: Discovery Formulas Formula Editor Path Alias Instance and Label Inventory > AP > Adva MIB etherServicesPB.my Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 8: Discovery Formulas WanPort Type SNMP (discovery) Description Formula to discover the Uplink (WAN) interfaces of the FSP 825CC Syntax Def UseQuotedStrings no; Dim I1 AS Integer Default * NAME ethernetPBWanIndex; Dim I2 AS Integer Default * NAME ethernetPBWanStatsIndex; Dim I3 AS Integer Default * NAME ethernetPBWanHistoryIndex; V01 = OIDVAL(ethernetPBWanSfpVendorName.%I1); V02 = OIDVAL(ethernetPBWanIfIndex.%I1); V03 = OIDVAL(ethernetPBWanMediaType.
Chapter 8: Discovery Formulas NOTES Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Chapter 8: Discovery Formulas 194 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Appendix A: Configuration This appendix explains how to configure the Adva Optical Metro Ethernet Technology Pack and consists of the following topics: Topic Page Overview 195 Before You Begin 195 Configure the Technology Pack 196 Other Tasks and Considerations 198 Overview The Adva Optical Metro Ethernet Technology Pack is a MIB-based, SNMP pack, and its configuration is relatively straightforward.
Appendix A: Configuration — Access to the SilverStream server. — Access to the DataChannel server. • Have completed the following tasks: — Reviewed the release notes for the current technology pack. Important: Release notes contain important information you need to consider before installing a technology pack. They also contain information on specific patches that need to be installed before you configure a technology pack.
Appendix A: Configuration 2-a. Change your working directory to $PVMHOME/bin (/opt/datamart/bin, by default) on the DataMart server. 2-b. Invoke the DataMart GUI by entering the following command and pressing Enter: pvm 2-c. Click the Configuration tab, then click Request Editor to open the Request Editor. 2-d. Click the Collection tab. 2-e. Click Refresh. The predefined data collection requests are loaded into the Request Editor from the database. 2-f.
Appendix A: Configuration 4. (Requires the Netcool/Proviso DataMart Configuration Guide) Run the initial SNMP inventory and initiate a discovery. An inventory collects data about the network resources that the technology pack monitors. After you install an SNMP technology pack, you must create an inventory profile using the Inventory Tool Wizard and then initiate a discovery by executing the inventory profile using the Inventory Tool.
Appendix A: Configuration See the Netcool/Proviso DataMart Configuration Guide for information on using the Netcool/Proviso DataMart Resource Editor. Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Appendix A: Configuration 200 Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.
Additional Copyright Information The following copyright information is for software used by Netcool/Proviso. Tcl 8.3.3, Combat/TCL 0.7.3, Combat/TCL 0.7.5, TclX 8.3, TK 8.3.3 This software is copyrighted by the Regents of the University of California, Sun Microsystems, Inc., Scriptics Corporation, and other parties. The following terms apply to all files associated with the software unless explicitly disclaimed in individual files.
Additional Copyright information DISTRIBUTORS HAVE NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. Various copyrights apply to this package, listed in 3 separate parts below. Please make sure that you include all the parts. Up until 2001, the project was based at UC Davis, and the first part covers all code written during this time.
Additional Copyright information • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.
Additional Copyright information This software is copyrighted by the Regents of the University of California, Sun Microsystems, Inc., and other parties. The following terms apply to all files associated with the software unless explicitly disclaimed in individual files.
Additional Copyright information 3. Neither the names of Networks Associates Technology, Inc, Cambridge Broadband Ltd., Sparta, Inc., Cisco, Inc, Beijing University of Posts and Telecommunications, Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Additional Copyright information for loss of data, loss of profit, or any other damage resulting directly or indirectly from the use of the software, even if the damage is caused by defects in the software. 3. You may use this software in any applications you build. 4. You may distribute this software provided that the software documentation and copyright notices are included and intact. 5.
