Air Cleaner User Manual

START CMDSERV

Compaq

(DIGITAL)

OpenVMS

OS/390 OS/400 OS/2 Warp Compaq NSK UNIX systems Windows NT

Use START CMDSERV to initialize the command server.

Synonym:STACS

START CMDSERV

 START CMDSERV !

Usage notes

1. START CMDSERV starts the command server and allows it to process

commands in the system-command input queue

(SYSTEM.COMMAND.INPUT), mover commands, and commands using

CMDSCOPE.

2. If this command is issued through the initialization files or through the

operator console before work is released to the queue manager (that is, before

the command server is started automatically), it overrides any earlier STOP

CMDSERV command and allows the queue manager to start the command

server automatically by putting it into an ENABLED state.

3. If this command is issued through the operator console while the command

server is in a STOPPED or DISABLED state, it starts the command server and

allows it to process commands on the system-command input queue, mover

commands, and commands using CMDSCOPE immediately.

4. If the command server is in a RUNNING or WAITING state (including the case

when the command is issued through the command server itself), or if the

command server has been stopped automatically because the queue manager is

closing down, no action is taken, the command server remains in its current

state, and an error message is returned to the command originator.

5. START CMDSERV can be used to restart the command server after it has been

stopped, either because of a serious error in handling command messages, or

commands using the CMDSCOPE parameter.

START CMDSERV

260

MQSeries MQSC Command Reference