Air Cleaner User Manual

v On another specific named queue manager in the group.
v On every active queue manager in the group.
v On the most suitable queue manager in the group, determined
automatically by the queue manager itself.
The various combinations of CHLDISP and CMDSCOPE are summarized
in Table 9
Table 9. CHLDISP and CMDSCOPE for START CHANNEL
CHLDISP CMDSCOPE( ) or
CMDSCOPE (local-qmgr)
CMDSCOPE (qmgr-name) CMDSCOPE(*)
PRIVATE Start as a private channel on
the local queue manager
Start as a private channel on
the named queue manager
Start as a private channel on
all active queue managers
SHARED For a shared SDR, RQSTR,
and SVR channel with a
nonblank CONNAME, start
as a shared channel on the
most suitable queue manager
in the group.
For a shared RCVR,
SVRCONN, and SVR
channel with a blank
CONNAME, start the
channel as a shared channel
on all active queue
managers.
For a shared CLUSSDR or
CLUSRCVR channel, this
option is not permitted.
This might automatically
generate a command using
CMDSCOPE and send it to
the appropriate queue
managers. If there is no
definition for the channel on
the queue managers to
which the command is sent,
or if the definition is
unsuitable for the command,
the action fails there.
The definition of a channel
on the queue manager where
the command is entered
might be used to determine
the target queue manager
where the command is
actually run. Therefore, it is
important that channel
definitions are consistent.
Inconsistent channel
definitions might result in
unexpected command
behavior.
Not permitted Not permitted
START CHANNEL
256
MQSeries MQSC Command Reference
|
|
|
|
|
|
|
|
||
|
||
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||