Air Cleaner User Manual

qmgr-name
The command is executed on the queue manager you specify,
providing the queue manager is active within the queue-sharing
group.
You can specify a queue manager name, other than the queue
manager on which the command was entered, only if you are
using a queue-sharing group environment and if the command
server is enabled.
XCFMNAME(mname)
The name of the XCF member within the group specified by XCFGNAME
to which the Tpipe belongs. This is 1 through 16 characters long, and is
required.
ACTION
Specifies whether to commit or back out any unit of recovery associated
with this Tpipe. This is required if there is such a unit of recovery reported
in message CSQ2020E; otherwise it is ignored.
COMMIT
The messages from MQSeries are confirmed as having already
transferred to IMS; that is, they are deleted from the MQSeries-IMS
bridge queue.
BACKOUT
The messages from MQSeries are backed out; that is, they are
returned to the MQSeries-IMS bridge queue.
SENDSEQ(integer)
The new recoverable sequence number to be set in the Tpipe for messages
sent by MQSeries and to be set as the partner’s receive sequence number.
It must be hexadecimal and can be up to 8 digits long. It is optional; if
omitted, the sequence number is not changed but the partner’s receive
sequence is set to the MQSeries send sequence number.
RCVSEQ(integer)
The new recoverable sequence number to be set in the Tpipe for messages
received by MQSeries and to be set as the partner’s send sequence number.
It must be hexadecimal and can be up to 8 digits long. It is optional; if
omitted, the sequence number is not changed but the partner’s send
sequence is set to the MQSeries receive sequence number.
XCFGNAME(gname)
The name of the XCF group to which the Tpipe belongs. This is 1 through
8 characters long. It is optional; if omitted, the group name used is that
specified in the OTMACON system parameter.
RESET TPIPE
244
MQSeries MQSC Command Reference
|
|
|
|
|
|
|
|
|