Air Cleaner User Manual

5 Valid only when the queue manager is a member of a queue-sharing group.
You can use queue-sharing groups only on MQSeries for OS/390.
Parameter descriptions
You must specify the name of the channel definition you want to display. This can
be a specific channel name or a generic channel name. By using a generic channel
name, you can display either:
v All channel definitions
v One or more channel definitions that match the specified name
(generic-channel-name)
The name of the channel definition to be displayed (see “Rules for naming
MQSeries objects” on page 4). A trailing asterisk (*) matches all channel
definitions with the specified stem followed by zero or more characters. An
asterisk (*) on its own specifies all channel definitions. The names must all
be defined to the local queue manager.
TYPE This is optional. It can be used to restrict the display to channels of one
type.
The value is one of the following:
ALL Channels of all types (excluding
client-connection channels) are displayed
(this is the default). On OS/390, client
connection channels are also displayed.
SDR Sender channels only are displayed.
SVR Server channels only are displayed.
RCVR Receiver channels only are displayed.
RQSTR Requester channels only are displayed.
CLNTCONN Client-connection channels only are
displayed.
SVRCONN Server-connection channels only are
displayed.
CLUSSDR Cluster-sender channels only are displayed
(valid on AIX, HP-UX, OS/2 Warp,
OS/390, OS/400, Sun Solaris, and
Windows NT only).
CLUSRCVR Cluster-receiver channels only are
displayed (valid on AIX, HP-UX, OS/2
Warp, OS/390, OS/400, Sun Solaris, and
Windows NT only).
On AIX, HP-UX, OS/2 Warp, OS/400, Sun Solaris, and Windows NT,
CHLTYPE(type) can be used as a synonym for this parameter.
ALL Specify this to cause all parameters to be displayed. If this parameter is
specified, any parameters that are also requested specifically have no effect;
all parameters are still displayed.
On AIX, HP-UX, OS/2 Warp, OS/390, OS/400, Sun Solaris, and Windows
NT, this is the default if you do not specify a generic name and do not
request any specific parameters.
DISPLAY CHANNEL
152
MQSeries MQSC Command Reference