Air Cleaner User Manual
DESCR(string)
Plain-text comment. It provides descriptive information about the object
when an operator issues the DISPLAY QUEUE command.
It should contain only displayable characters. The maximum length is 64
characters. In a DBCS installation, it can contain DBCS characters (subject
to a maximum length of 64 bytes).
Note: If characters are used that are not in the coded character set
identifier (CCSID) for this queue manager, they might be translated
incorrectly if the information is sent to another queue manager.
DISTL
Whether distribution lists are supported by the partner queue manager.
YES Distribution lists are supported by the partner queue manager.
NO Distribution lists are not supported by the partner queue manager.
Note: You should not normally change this parameter, because it is set by
the MCA. However you can set this parameter when defining a
transmission queue if the distribution list capability of the
destination queue manager is known.
This parameter is valid only on AIX, HP-UX, OS/2 Warp, OS/400, Sun
Solaris, and Windows NT.
FORCE
This parameter applies only to the ALTER command on alias, local and
remote queues.
Specify this parameter to force completion of the command in the
following circumstances.
For an alias queue, if both of the following are true:
v The TARGQ parameter is specified
v An application has this alias queue open
For a local queue, if both of the following are true:
v The NOSHARE parameter is specified
v One or more applications have the queue open for input
FORCE is also needed if both of the following are true:
v The USAGE parameter is changed
v Either one or more messages are on the queue, or one or more
applications have the queue open
Do not change the USAGE parameter while there are messages on the
queue; the format of messages changes when they are put on a
transmission queue.
For a remote queue if both of the following are true:
v The XMITQ parameter is changed
v One or more applications has this queue open as a remote queue
FORCE is also needed if both of the following are true:
v Any of the RNAME, RQMNAME, or XMITQ parameters is changed
Define queues
118
MQSeries MQSC Command Reference