Air Cleaner User Manual


(1) (2)
DEFBIND(OPEN)
(2)
DEFBIND(NOTFIXED)
(1)
RNAME(’’)
RNAME(string)
(1)
RQMNAME(’’)
RQMNAME(string)


(1) (5)
SCOPE(QMGR)
(5)
SCOPE(CELL)
(1)
XMITQ(’’)
XMITQ(string)
Notes:
1 This is the default supplied with MQSeries, but your installation might have
changed it.
2 Valid only on AIX, HP-UX, OS/2 Warp, OS/390, OS/400, Sun Solaris, and
Windows NT.
3 Valid only on OS/390.
4 Valid only when the queue manager is a member of a queue-sharing group.
You can use queue-sharing groups only on MQSeries for OS/390.
5 Valid only on Compaq (DIGITAL) OpenVMS, OS/2 Warp, UNIX systems,
and Windows NT.
Parameter descriptions
The parameter descriptions also apply to the ALTER QUEUE commands, with the
following exceptions:
v The FORCE parameter applies only to the ALTER QUEUE commands.
v The LIKE parameter applies only to the DEFINE QUEUE commands.
v The REPLACE and NOREPLACE parameter applies only to the DEFINE
QUEUE commands.
v The variations in the CMDSCOPE and QSGDISP parameters between the ALTER
QUEUE and DEFINE QUEUE commands are described.
(q-name)
Local name of the queue, except for the remote queue where it is the local
definition of the remote queue. This is required.
The name must not be the same as any other queue name (of whatever
queue type) currently defined on this queue manager (unless REPLACE or
ALTER is specified). See “Rules for naming MQSeries objects” on page 4.
BOQNAME(string)
The excessive backout requeue name.
This parameter is supported only on local and model queues.
Apart from maintaining a value for this parameter, the queue manager
takes no action based on its value.
BOTHRESH(integer)
The backout threshold.
This parameter is supported only on local and model queues.
DEFINE QREMOTE
114
MQSeries MQSC Command Reference
|
|
|
|
|
|
|
|
|