Air Cleaner User Manual

successfully connected. However, if the cause of the failure is such that
retry is unlikely to be successful, retries are not attempted.
The value must be greater than or equal to zero, and less than or equal to
999 999 999.
This parameter is valid only for channels with a channel type (CHLTYPE)
of SDR, SVR, CLUSSDR, or CLUSRCVR.
SHORTTMR(integer)
For short retry attempts, this is the maximum number of seconds to wait
before reattempting connection to the remote queue manager.
The time is approximate; zero means that another connection attempt is
made as soon as possible.
The interval between retries might be extended if the channel has to wait
to become active.
The value must be greater than or equal to zero, and less than or equal to
999 999 999.
Note: For implementation reasons, the maximum retry interval that can be
used is 999 999; values exceeding this will be treated as 999 999.
This parameter is valid only for channels with a channel type (CHLTYPE)
of SDR, SVR, CLUSSDR, or CLUSRCVR.
TPNAME(string)
LU 6.2 transaction program name (maximum length 64 characters).
This parameter is valid only for channels with a transport type (TRPTYPE)
of LU 6.2.
On Tandem NSK, this should be set to the local TP name. This can be
followed by the name of the TP on the remote machine, for example:
TPNAME('localtp[.remotetp]')
Both names can be up to 16 characters in length.
The name can also be nonblank for client connection channels to be used
with OS/2 Warp.
On other platforms, this should be set to the SNA transaction program
name, unless the CONNAME contains a side-object name in which case it
should be set to blanks. The actual name is taken instead from the CPI-C
Communications Side Object, or the APPC side information data set.
See the information about configuration parameters for an LU 6.2
connection for your platform in the MQSeries Intercommunication manual
for more information.
On Windows NT SNA Server, and in the side object on OS/390, the
TPNAME is wrapped to upper case.
This parameter is not valid for channels with a channel type (CHLTYPE) of
RCVR.
TRPTYPE
Transport type to be used.
DEFINE CHANNEL
Chapter 2. The MQSeries commands 91