User Guide

Settings menu
The Settings menu provides set-up type adjustments that are not changed often.
Following is a list of the setting options:
v Audio: Enables you to adjust the volume of the internal speaker. Adjustments
can also be made from the projector keypad and the remote. The Audio menu is
shown in Figure 5-12.
v Sources: Power-up Source determines which source the projector checks first for
active video during power-up. Figure 5-13 shows the Sources and Power-up
Source menus.
When the Autosource feature is on, the projector automatically finds the active
source, checking the Power-up Source first. The options are
– Computer 1 (for a computer source)
– Video 1 (for S-video connections)
– Video 2 (for composite video connections)
When this feature is off, the projector defaults to the source selected in the
Power-up Source menu. To display another source, you must manually select a
source by pressing the Computer or Video button on the remote or keypad.
v System: Following are the settings from the System menu, shown in Figure 5-14.
– Rear reverses the image so you can project from behind a translucent screen.
– Ceiling turns the image upside down for ceiling-mounted projection.
– Display Messages displays status messages (such as “Searching” or “Mute”)
in the lower-left corner of the screen.
Figure 5-12. Audio menu
Figure 5-13. Sources and Power-up Source menus
Figure 5-14. System menu
Chapter 5. Using the menus 5-5