User Guide

v Adjust the audio source.
v If playing a video, make sure the playback has not been paused.
Using the keypad buttons
Following is an overview of the keypad button functions.
v Menu– Opens the on-screen menus (see Chapter 5, “Using the menus”, on
page 5-1).
v Select– Confirms choices made in the menus (see Chapter 5, “Using the menus”,
on page 5-1).
v Up and Down arrows– Navigates to and adjusts settings in the menus (see
Chapter 5, “Using the menus”, on page 5-1).
v Auto Image– Resets the projector to the source.
v Presets– Cycles through the available preset settings (see “Picture menu” on
page 5-2).
v Keystone– Adjusts squareness of the image (see “Adjusting the image” on
page 2-5).
v Volume– Adjusts sound (see “Using the audio” on page 4-4).
v Video and Computer– Changes the active source.
Optimizing computer images
After your computer is connected properly and the computer image is on the
screen, you can optimize the image using the onscreen menus. For general
information on using the menus, see Chapter 5, “Using the menus”, on page 5-1.
v Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture menu.
v Change the Aspect Ratio. Choose the option that best fits your input source.
v Adjust the Color Temperature in the Advanced menu.
v Adjust the phase, Tracking, or Horizontal or Vertical position in the Advanced
menu.
v Once you have optimized the image for a particular source, you can save the
settings using Presets. This allows you to quickly recall these settings later.
Figure 4-4. Keypad buttons
Chapter 4. Using the projector features 4-5