Air Cleaner User Manual

To enable this script, change the name to fsback.pre.
install.postroot_hwmigrate
This sample script allows you to install a system backup created on a
different system onto a new machine, even though the new machine has
different device support software requirements. The new system must be
booted from media that contains the required base device support, but the
source system from where the backup was created does need to have the
software support pre-installed.
To boot the new system from the media with the required bass device
support, place an AIX Version 4 Installation CD in the drive of the new
system during the installation process. After the rootvg volume group data
is restored, the additional required device support is automatically added
to the new system from the CD-ROM.
To enable this script, change the name to install.postroot.
install.post_rmnet
This script automatically removes any network configuration from the
system at the end of the installation process. This is necessary when
installing multiple systems from the same system backup to prevent
multiple machines from existing on the network with the same network
configuration.
This script also prevents SysBack from being removed from the system at
the end of the installation process.
If this script is not enabled, and a system is installed from a system backup
created from a different machine, you are prompted to select whether or
not to remove the network configuration and the SysBack product.
To enable this script, change the name to install.post.
D-4 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide