Air Cleaner User Manual

-a ″adminID″
Specify a TSM Admin ID that has client owner authority when the client
node’s password is unknown. When specifying a value in the field, you must
also specify the Admin’s password in the Password field rather than the client
node password. This flag is optional.
-P ″tsmpasswd″
Specify the TSM client password that is associated with the TSM Client Node
Name value. If you do not know the password of the client node name, enter
the password to administrative id created for this node which has client owner
authority. In most cases, this was automatically created when you registered
the node to the TSM server.
Note: If you do not know either password, you will have to log on to the TSM
server as an administrator and issue the command: update node
your_nodename new_password. Then enter that new password into this
field.
This flag is optional.
-s ″serverIP″
Specify the IP address that corresponds to the TCPServeraddress for the TSM
server as defined in the file /usr/tivoli/tsmserver/bin/dsmserv.opt on the TSM
server system. This flag is optional.
-g ″gateway ID″
Specify the gateway address that this client system must go through in order
to access the server system. If the client and the server are on the same subnet,
it is recommended to re-enter the server’s IP address here. This flag is
optional.
-S ″submask″
Specify the subnet mask, if required, for the client network interface to contact
the installation server. This flag is optional.
Related Information
The sbtsmdevice, sbtsmlist, , mkvgback, mklvback, mkjfsback, and mkdirback
commands.
A-84 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide