Air Cleaner User Manual

one–fourth of the file system is used. If this were the case
with all file systems, the backup and installation would likely
take longer than normal.
v When installing or recreating volume groups or logical
volumes from this backup, you cannot change the following
attributes:
– Any file system attributes
– Logical volume name
– Logical volume size
– The volume group in which you want to create a logical
volume
Backup file ID
Default=date/time (MMDDhhmm). Uniquely identifies the
backup. You can change this field to any value but it cannot
contain single (’) or double (″) quotes. This field is active only
when you back up to a disk image file.
Dynamically Created Backup File ID
This option lets you generate a dynamic backup file ID. It uses
the same current date and time values at the time of command
execution as the ID. If the value of the Backup File ID field set
to yes, it will overwrite the Backup File ID field.
Report output type
Default=progress indicator. Keep the default value if you want
to display a progress indicator during the backup process,
which indicates the approximate total backup time and amount
completed. Press Tab to select “file list” if you want to display
a list of files as they are being backed up, or Tab once more to
show “only errors” that occur during the backup.
Platform/kernel type for tape boot image
Default=current platform/kernel type. This field is displayed
only when you use a tape drive or virtual device. The field
does not display a value if the current platform does not
support tape boot or tape boot support is not installed. Change
this field only if you are creating a backup that you want to
install (clone) onto another platform type or to a machine
running a different kernel. Press F4 to list the platforms/kernels
that have tape boot support installed on the system and select
from the list.
The following platform/kernel types are currently supported:
chrp Common Hardware Reference Platform
chrp/MP Multiprocessor Common Hardware Reference
Platform
rs6k RISC System/6000 (uniprocessor)
rs6k/MP Multiprocessor RISC System/6000
rspc PCI-based (PC) RISC System/6000
(uniprocessor)
rspc/MP Multiprocessor PCI-based (PC) RISC
System/6000
4-6 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide