Air Cleaner User Manual

–n
With the -L flag, indicates the number of logical partitions (LPs) assigned to the
logical volume. With the -P flag, displays the total physical partitions (PPs)
available on the physical volume.
–p
With the -V or -G flag, displays the physical volumes in the volume group.
With the -L flag, displays the physical volumes on which a logical volume
resides. This flag cannot be used with the -m flag.
–q
Used with the -V flag to indicate whether or not quorum checking is enabled for
a volume group.
–r Used with the -L flag to indicate whether or not the logical volume is
relocatable.
–s
Used with the -L flag to indicate whether or not a strict allocation policy is
enabled for a logical volume, preventing a single copy from being placed on
multiple physical volumes.
–t Used with the -L flag to display the logical volume type.
–u
Used with the -L flag to display the upperbound limit (maximum PVs) for the
logical volume.
–v
With -L flag, displays whether or not write-verification is enabled. With the -P
flag, displays the number of volume group descriptor areas (VGDAs) on the
physical volume.
–w
With -L flag, displays whether or not mirror-write-consistency checking (MWC) is
enabled.
–x
With the -V flag, indicates whether or not the volume group is varied on in
concurrent mode. With the -L flag, indicates the maximum logical partitions (LPs)
for the logical volume.
–z
With the -L flag, indicates the logical volume stripe size. A value of zero (0)
indicates that striping is disabled.
–A
With the -V flag, indicates whether or not the volume group is automatically
varied on at system startup.
-G “PVname”
Displays volume group information using the physical volume name instead of
the volume group name.
–I Whenever physical volume information is displayed, this flag indicates that the
physical volumes should be displayed using the physical volume ID (PVID).
This is the default.
–L “LVname”
Displays attributes for the logical volume name specified.
–N
Whenever physical volume information is displayed, this flag displays physical
Appendix A. Commands A-25