Air Cleaner User Manual

3. Press Enter to create the virtual device.
The new virtual device name is generated and displayed on the screen. Repeat the
above steps for each additional virtual device you want to add.
Listing Virtual Devices
To list all of the virtual devices currently defined, select List Virtual Devices from
the Virtual Devices menu.
This list shows the virtual device name, whether the virtual device is configured as
an autoloader or auto-eject device, the write policy (s=sequential, p=parallel,
c=multi-copy), the virtual device description, and a list of the physical devices that
make up the virtual device.
Removing a Virtual Device
To remove a virtual device:
1. From the Virtual Devices menu, select Remove a Virtual Device.
Note: From a command line, type smit sb_remexclude.
2. Enter the virtual device name to delete or press F4 to list the available virtual
devices and select from the list.
3. Press Enter to delete the specified virtual device.
Chapter 21. Virtual Devices 21-5