Air Cleaner User Manual
Note: At a command line, type smit sb_script_c.
2. Select the type of backup script you want to create. The following choices are
available:
v Create a System Backup Script
v Create a Volume Group Backup Script
v Create a Filesystem Backup Script
v Create a Logical Volume Backup Script
v Create a File/Directory Backup Script
Note: For this example, Create a System Backup Script is used.
3. On the Device Selector screen, highlight the device you want to use and press
Enter.
4. The following screen is displayed.
The first three options are described below. The other options are identical to
the options available when you create a system backup. For descriptions of
those options, see the instructions for creating system backups in Chapter 4,
“Performing Backups”, on page 4-1.
The first six options have the following definitions:
Backup Script Name (Required)
The fully-qualified filename for the backup script. If a directory is not
specified, the script is created in the /usr/lpp/sysback/sbscripts
directory by default.
Description (Optional)
The purpose or content of the script. If no description is provided, the
description, by default, reflects the type of backup performed by the
script.
Create a System Backup Script
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP]
Backup Script Name [system_backup]
Description [System Backup]
Overwrite Existing Script No
Save Backup Output to a Log? No
Location of Log File []
Overwrite Previous Log? No
HOSTNAME of server
Device Name [/dev/rmt0]
Create a Power Backup? No
Report output type File List
Platform/kernel type for tape boot image rspc/MP
Network install support to include
Compress data before writing to media? No
User Description []
Buffer size (in Kbytes) [64]
Preserve Physical partition mapping? No
Device name for remote volume prompt []
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 20-2. The Create a System Backup Script Menu
20-2 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide