Air Cleaner User Manual

The fields have the following definitions:
Hostname of server The server hostname if a server option was
selected on the prior device selector screen. You
cannot change this field.
Device name The device, if a tape drive or virtual device was
selected. You cannot change this field from this
screen.
Disk image file The name of the disk image file previously
selected. This field is displayed only if a disk
image file name was selected. You cannot be
change this field from this screen. device image
file:verifying
Verify Data Type The backup type. It indicates the type of data,
as shown in the Data to verify field, that is to
be verified. This field is for information only
and cannot be changed.
Report output type Default=progress indicator. Keep the default
value if you want to display a progress
indicator during the backup process, which
indicates the approximate total backup time
and amount completed. Press Tab to select “file
list” to display a list of files as they are being
backed up, or Tab once more to show “only
errors” that occur during the backup.
Device name for remote volume prompt
Default=(Blank/None). Enter a TTY, LFT or PTS
device name to send the volume prompt to a
specified device rather than to the current SMIT
screen. If you are backing up to a remote host,
the device name you specify is attached to the
Verify a Backup
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Hostname of server hambone.austin.ibm.com
Device name /dev/rmt0
Verify data type Volume_Group
Report output type both +
Device name for remote volume prompt []
Data to verify (of above type) [rootvg]
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 18-2. Default Options and Values Available When Verifying the Contents of a Volume Group Backup
18-4 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide