Air Cleaner User Manual

Sequence Number. This number must be between 1 and the total
number of System Backups on the tape media. The default is
none/blank.
Remove Sysback from Foreign Client After Install
This yes or no field indicates whether to remove the SysBack program
from the system after an installation. This is useful when the user has
not purchased a license for the client that will be installed. The default
is no.
Remove Network Congfig from Foreign Client
This yes or no field indicates whether to remove network specific
information required to configure the host to the network. This option
is useful when the machine installed was cloned from a backup image
of a machine that is still present on the network. The default is no.
Install Additional Device Driver Support?
This option tells SysBack how much to instal of what is contained in
the media in the location specified by the Software Install Device
option. The two options are:
Minimum
Selecting this option will install only those device support
filesets identified by AIX when the system was booted. This
information is obtained from the file /tmp/devices.pkgs which
is created by AIX when the system was booted. This file is not
always 100% accurate regarding what device support is needed
as some devices return invalid installp package names rather
than individual filesets. In most cases, however, this is a
reliable alternative to pre-installing all device support filesets
on to a system prior to creating the backup image.
All Selecting this option tells SysBack to perform an install
command against every item contained on the media in the
specified location. This may include device support filesets or
any other software that is located on the media.
Software Install Device
This option lets you specify a CDROM device name, a tape device
name, or a NIM LPPSOURCE directory name. The NIM LPPSOURCE
directory name provides additional device support to install during
installation. This device support, if available in the specified location,
will be installed in circumstances where the needed device support for
this machine is contained in the boot image, not the backup image to
be installed.
If this is a NIM Resource Network Boot, SysBack will automatically
pulls device support from the NIM LPPSOURCE specified when the
Network Boot client was added regardless of whether this option is
edited. For more information on configuring a NIM Resource Network
Boot, see Chapter 13, “Network Boot/Installation Configuration”,on
page 13-1.
Debug Logging
This yes or no field indicates whether to turn on debug logging
operations for troubleshooting network boot and installation problems.
The default is no.
Post-Install Script
Enter a filename to include a post installation script on the customized
Chapter 16. Utilities 16-15