Air Cleaner User Manual

remove one or more of the default created file systems. Specify one or
more of the following combinations:
C Do not remove the cd_fs file system I Do not remove the
cd_image file system
This value may be specified as CI or CI.
4. Press Enter to begin creation of the bootable CD or DVD.
Changing SysBack Tape Boot Defaults
Use the Change SysBack Tape Boot Defaults menu to set tape boot defaults.
Setting tape defaults will let you minimize, possibly eliminate, user prompting
during a tape boot or installation process. These defaults are stored in a file named
/sbinstall.data. Therefore, you must set these options before the backup is
executed, or boot only tape created, in order to ensure that this file is included in
the boot image. It is the file that is used during the boot and installation process
that processes these specifications.
This is similar to the Set Network Install Client Defaults menu for network boot
or installation processes.
To set the Tape Boot Defaults:
1. From the Utilities menu, select Change SysBack Tape Boot Defaults.
Note: From a command line, type smit sb_cfginsttape.
2. The following screen is displayed:
Note: You may also access this same menu by using the following SMIT paths:
smitty sysback Sysback Program Defaults
Change Sysback Program Defaults
Change Sysback Tape Defaults
Change Sysback CD/DVD Boot Defaults Set Network
Install Defaults
Chapter 16. Utilities 16-9