Air Cleaner User Manual

Select the desired network interface and press Enter to verify or change the
network settings associated with this restore process. The following screen will be
displayed:
Verify or edit the values in each field as required for this restore process. The fields
have the following definitions:
Client IP Address (Required)
Specify the IP address of this client system. Do not enter leading zeros in
the address.
Client Node Name (Required)
Specify the TSM client nodename that was used to create the backup object
that you would like to restore. This may, or may not be, the same name as
the hostname returned by the Client IP Address specified above.
TSM Admin ID (Optional)
Specify a TSM Admin ID that has client owner authority when the client
node’s password is unknown. When specifying a value in the field, you
must also specify the Admin’s password in the Password field rather than
the client node password.
+----------------------------------------------------------+
| Change Network Interface |
+----------------------------------------------------------+
Device Description Location
==>/dev/tok0 IBM PCI Tokenring Adapter (14101800 04-05
/dev/ent0 IBM PCI Ethernet Adapter (22100020) 04-B0
/dev/ent1 IBM 10/100 Mbps Ethernet PCI Adapte 04-04
+------------------------------------------------------------------------------+
| Select one network device or one or more tape devices. |
| The "==>" symbol indicates current choice(s). |
+------------------------------------------------------------------------------+
| Use ARROW or Tab keys to move, ENTER to select or deselect, ESC when done. |
+------------------------------------------------------------------------------+
Figure 15-20. The Change Network Interface Menu
+----------------------------------------------------------+
| Change TSM Network Settings |
+----------------------------------------------------------+
Client IP Address 192.168.1.58
Client Node Name lasher
TSM Admin ID
Server IP Address 192.168.1.55
Gateway IP Address 192.168.1.58
Subnet Mask 255.255.255.192
Port Number 1500
Password: tsmpass
Token-ring Speed:
4 megabits
==> 16 megabits
Network Adapter: tok0 [inactive]
+------------------------------------------------------------------------------+
| Enter the TSM server port number that corresponds to the desired TSM server |
| connection for this installation. |
+------------------------------------------------------------------------------+
| Use ARROWS or Tab to move or INS/DEL to edit. Press ESC to return. |
+------------------------------------------------------------------------------+
Figure 15-21. The Change TSM Network Settings Menu
Chapter 15. Integrating to IBM Tivoli Storage Manager 15-23