Air Cleaner User Manual

which has client owner authority. In most cases, this was automatically
created when you registered the node to the TSM server.
Note: If you do not know either password, you will have to log on to
the TSM server as an administrator and issue the command:
update node your_nodename new_password. Then enter that
new password into this field.
TSM Network Device Name
Specify the network device name to use for communications with the
TSM server. For example: ent0.
TSM Server IP Address
Specify the IP address that corresponds to the TCPServeraddress for the
TSM server as defined in the file /usr/tivoli/tsmserver/bin/dsmserv.opt
on the TSM server system.
Subnet Mask
Specify the subnet mask, if required, for the client network interface to
contact the installation server.
Token-ring Speed (if applicable)
Specify the correct token-ring speed when a token-ring device specified
in the TSM Network Device field.
Ethernet Interface (if applicable)
Specify either type of ethernet interface when an ethernet device is
specified in the TSM Network Device Name field. For example: IEEE
802.3
Ethernet Connection Type (if applicable)
Specify the connection type for the ethernet interface when an ethernet
device is specified in the TSM Network Device Name field. For
example: BNC.
7. Press Enter to set the defaults.
For more information regarding the registration of a TSM node or determining the
correct TSM Server port to use, please refer to the IBM Tivoli Storage Manager for
AIX: Administrator’s Guide (GC32-0768) and the IBM Tivoli Storage Manager for AIX:
Administrator’s Reference (GC32-0769).
Bare Metal Recovery and System Reinstallation from a TSM Server
Performing a system installation, or bare metal recovery, using a backup stored in
a TSM server is just like any other SysBack system installation with the following
exceptions:
v You must network boot the system to the Installation and Maintenance Main
Menu. Tape, CD, or DVD device boots are not supported.
v The installation device will be a TSM virtual device rather than a tape, CD,
DVD, or another network install server.
Once you have successfully executed a network boot, the following menu will be
displayed:
Chapter 15. Integrating to IBM Tivoli Storage Manager 15-21