Air Cleaner User Manual

Note: The SysBack network boot client definition is based on the hostname of
the client system. This may, or may not be, the same as the TSM client
node name.
The following screen is displayed:
6. Enter values for all applicable fields. The fields have the following definitions:
Hostname (Required)
Specify the hostname of the system which was configured as a SysBack
network boot client. The value for this field was populated by the input
in the previous menu.
Note: The SysBack network boot client definition is based on the
hostname of the client system. This may, or may not be, the same
as the TSM client node name.
TSM Client Node Name (Required)
Specify the TSM node name that will be used to connect to the TSM
server for bare metal recovery.
TSM Admin ID (Optional)
Specify a TSM Admin ID that has client owner authority when the
client node’s password is unknown. When specifying a value in the
field, you must also specify the Admin’s password in the Password
field rather than the client node password.
TSM Server Port
Specify the TSM server port number that should be used to connect to
the TSM server for bare metal recovery.
Gateway
Specify the gateway address that this client system must go through in
order to access the server system. If the client and the server are on the
same subnet, it is recommended to re-enter the server’s IP address here.
Client Node or Admin Password
Specify the TSM client password that is associated with the TSM Client
Node Name value. If you do not know the password of the client node
name, enter the password to administrative id created for this node
Set TSM Network Install Client Defaults
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
*Hostname sysback2.aix.dfw.ibm.c>
TSM Client Node Name []
TSM Admin ID []
TSM Server Port []
Gateway []
Client Node or Admin Password []
TSM network device name [] +
TSM Server IP address []
Subnet Mask []
Token-ring speed (if applicable) [] +
Ethernet Interface (if applicable) [] +
Ethernet Connection Type (if applicable) [] +
Figure 15-17. The Set TSM Network Install Client Defaults Menu
15-20 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide