Air Cleaner User Manual

Querying for SysBack Installation in SPOT Resource
This option can be used to determine if SysBack is installed in to a NIM SPOT
resource and, if so, at what level.
To query for installation:
1. From the NIM Resource Boot menu, select Query for SysBack Installation in
SPOT Resource.
Note: From the command line, type smit sb_querysb.
2. Press Enter.
Adding or Changing a Network Boot Client
This option configures a network boot client to be booted from the server. This
option generates the information necessary to boot the client using the specified
NIM SPOT resource. This option also automatically generates a boot image for the
specified client using the named NIM SPOT resource. SysBack obtains the
information regarding the client’s platform and kernel type from the previously
configured NIM machine object for that client.
To update the client’s boot image after installing or updating the software into the
NIM SPOT resource used by the client, repeat this process to change and update
the client’s boot image.
To add or change a network boot client:
1. From the NIM Resource Boot menu, select Add or Change a Network Boot
Client.
Note: From a command line, type smit sb_nimaddclient.
2. Highlight the client and press Enter.
3. The following screen is displayed.
The options have the following definitions:
NIM Client Name
The NIM machine object name for the boot client. This field cannot be
edited; it was generated from input on the previous selector screen.
Add or Change a Network Boot Client
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
*NIM Client Name sysback2
*NIM SPOT Resource Name [] +
*NIM LPP Source Name [] +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 13-4. The Add or Change a Network Boot Client Menu
13-12 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide