Air Cleaner User Manual

3. The following screen is displayed.
The options have the following definitions:
INPUT device / directory for software
This field cannot be edited; its contents are specified from a previous
selector screen.
NIM SPOT Resource Name
The NIM object name for the SPOT resource where SysBack will be
installed. Press F4 to get a list of previously configured NIM SPOT
resources.
NIM LPP Source Name
The NIM object name for the LPPSOURCE resource that supplies the
SysBack image. Press F4 to get a list of previously configured NIM
LPPSOURCE resources.
Note: The NIM LPPSOURCE resource specified should contain AIX
filesets of the same AIX level as the SPOT resource used to
install the client. For example, if the SPOT resource supplies
boot information for an AIX 4.3.3 system, the corresponding
LPPSOURCE should contain AIX filesets that are also at the AIX
4.3.3 level. This is not a requirement for any optional software
packages installed into the LPPSROURCE; each package can
have its own operating system compatibility requirements. The
level of SysBack contained in the LPPSOURCE can be any level
supported by the AIX level of the specified SPOT resource.
OVERWRITE Same or newer version?
Set this option to Yes if you want to reinstall the same, or an older
version of SysBack, than exists in this SPOT resource.
4. Once all entries are complete, press Enter to confirm selections and execute
your choices.
Note: The image is first copied from the specified input device or directory and
then copied to the specified LPPSOURCE before it is installed to the
specified SPOT resource.
Install Sysback into Spot Resource
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
*INPUT device/directory for software /usr/sys/inst.images
*NIM SPOT Resource Name [] +
*NIM LPP Source Name [] +
OVERWRITE Same or newer version? no +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 13-3. The Install Sysback into Spot Resource Menu
Chapter 13. Network Boot/Installation Configuration 13-11