Air Cleaner User Manual

maintenance shell after the dump copy completes, where you can perform
other operating system commands or reboot the system.
Rebooting the System Menu
An option is provided on the Main Menu to Reboot the System if you choose not
to reinstall the system at this time.
You can reboot in normal mode if the system was previously installed and has not
been overwritten. You can reboot in service mode to restart the installation process.
The process of selecting between normal and service mode differs depending on
the platform type.
1. For rs6k and rs6k/MP machines, you can turn the system key between the
normal and service positions before selecting to reboot. The system boots in the
mode selected.
2. For rspcand chrp machines, there is no system key. The system boots in normal
mode (from the first available disk) by default. To boot in service mode, follow
the example instructions provided in Appendix B, “Booting a System for
SysBack Installation or Maintenance”, on page B-1. However, you should refer
to the documentation that accompanied your particular machine type for
detailed instructions regarding system boot procedures.
The system shuts down, the screen clears, and the system reboots.
12-18 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide