Air Cleaner User Manual

This yes or no option indicates whether to remove network specific information
required to configure the host to the network. This option is useful when the
machine installed was cloned from the backup image of a machine that is still
present on the network. The default is no.
This option can also be set prior to installation usingthe Set Network Install Client
Defaults Menu described in “Setting the Network Install Client Defaults” on
page 13-5 in Chapter 13, or “Changing SysBack Tape Boot Defaults” on page 16-9
in Chapter 15.
Once you have made your selection, press ESC to return to the previous menu.
Install Additional Device Support: Selecting the Install Additional Device
Support option displays the following menu:
Install Device
This option lets you specify a CDROM device name, a tape device name,
or a NIM LPPSOURCE directory name. The NIM LPPSOURCE directory
name provides additional device support to install during installation. This
device support, if available in the specified location, will be installed in
circumstances where the needed device support for this machine is
contained in the boot image, not the backup image to be installed.
If this is a NIM Resource Network Boot, SysBack will automatically pulls
device support from the NIM LPPSOURCE specified when the Network
+----------------------------------------------------------+
| Remove Network Settings After Install |
+----------------------------------------------------------+
Do you wish to remove the network settings?
+------------------------------------------------------------------------------+
| Y = Remove network settings. N = Don’t remove network settings. |
+------------------------------------------------------------------------------+
| Type in the response and press ENTER or ESC to exit |
+------------------------------------------------------------------------------+
Figure 12-12. The Remove Network Settings After Install Menu
+----------------------------------------------------------+
| Install Additional Device Support |
+----------------------------------------------------------+
Install Device
Device Support To Install Minimum
+------------------------------------------------------------------------------+
| This option can be a locally attached install device like a tape drive |
| (/dev/rmt#) and cdrom (/dev/cd#) or an NFS mounted LPP Source Directory |
+------------------------------------------------------------------------------+
| Use ARROW/TAB keys to move, ENTER to Select, ESC to return to Main Menu. |
+------------------------------------------------------------------------------+
Figure 12-13. The Remove SysBack Programs After Install Menu
12-16 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide