Air Cleaner User Manual

Do you wish to view/change the logical volume or filesystem info?
Type y or n to indicate if you want to view or change the attributes for the root (/)
and /usr filesystems or logical volumes. This includes such attributes as the size
and disk location of these logical volumes. This provides, for example, an effective
tool for reducing the size of an over-expanded /usr filesystem without having to
reinstall the entire operating system. Refer to Chapter 11, “Changing the Volume
Group, Logical Volume and Filesystem Attributes”, on page 11-1 for additional
details.
You have one final prompt to determine if you want to continue the installation
process. Then the recovery installation begins. If the operating system was restored
from a backup taken from a different machine than the client, you might also be
asked whether or not to remove the SysBack product and the network
configuration. Refer to “Installing the System with Current Settings” on page 12-8
for additional information on these prompts. Upon completion, the system reboots
automatically.
Setting Tape Backup Sequence Number to Install From
If you are installing from tape media, and you have “stacked” system backups
onto the tapes, you might want to install from a system backup other than the first
backup on the tape. If so, you must select the correct backup sequence number
using this option. Although no action is performed on the media at this time,
changing the backup sequence number to anything other than “1” (the first system
backup on the media) causes the media to be forwarded to the correct system
backup before any additional installation processing occurs.
After selecting this option, you are prompted for the backup sequence number to
use. You must enter “1” for the first backup on the media, or any number up to
the number of system backups performed to the media. After making your
selection, you return to the Utilities menu.
Post Install Configuration Options
The Post Install Configuration Options enables you set certain common user
prompts that display during an installation. Setting the response to these prompts
before installation is a convenient way to minimize the intervention required
during normal installation processing - especially when cloning a backup image
from one machine to another.
From the installation main menu, select Post Install Configuration Options to
display the following menu:
12-14 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide