Air Cleaner User Manual

The option for changing filesystem options is not displayed if the backup media is
a power backup. Since the power backup contains only raw logical volumes, no
filesystem information can be changed.
The current settings for each volume group are displayed. You can change the
settings for a volume group or for the logical volumes within the volume group by
selecting the line number corresponding to the volume group name.
The remaining steps required to change the volume group and logical volume
information is identical to the process for editing the volume group and logical
volume attributes when recreating a volume group or logical volume on a running
system. These instructions are provided in Chapter 11, “Changing the Volume
Group, Logical Volume and Filesystem Attributes”, on page 11-1.
When you finish your changes, press Esc to return to the Main Menu.
Installing the System with Current Settings
When you have made all selections, such as changing of the installation device or
the volume group and logical volume characteristics, you can continue the
installation by selecting Install the System with Current Settings on the Main
Menu.
If you are installing from a network installation server or a TSM server and did not
previously select to edit the volume group attributes, the server is contacted and a
list of available system backup disk image files and installation devices are
displayed. You must select a disk image file or device from which the volume
group data is restored.
The system again compares the current hardware configuration with the volume
group and logical volume attributes from the backup, including any changes you
made from the installation menus, to verify that there is adequate space on the
system to continue the installation. If not, a message indicating the problem is
displayed and you return to the Main Menu.
+----------------------------------------------------------+
| Change Volume Group & Logical Volume Information |
+----------------------------------------------------------+
Select Physical Volumes for Volume Groups
Change Volume Group Attributes
Select Physical Volumes for Logical Volumes
Change Logical Volume Attributes
Change Filesystem Attributes
Change Physical Volume Attributes
Advance Install Options
+------------------------------------------------------------------------------+
| Hihglight the option to select and press Enter. |
| |
+------------------------------------------------------------------------------+
| Use ARROW or Tab keys to move and ENTER to Select. Press ESC for Main Menu. |
+------------------------------------------------------------------------------+
Figure 12-7. The Change Volume Group & Logical Volume Information Menu
12-8 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide