Air Cleaner User Manual

the next device in the list when prior reaches end of volume). For details on the
use of virtual devices, refer to Chapter 21, “Virtual Devices”, on page 21-1.
Important Note: If you are installing from a local parallel virtual device, meaning
the backup was striped across multiple physical devices, you
must select the same number of devices when performing the
installation. You must also insert the tapes in the drives in the
order they appear on the Installation Device menu.
Changing the network installation server after a network boot: If you booted
from a network boot server but want to install from a device or file on a different
network installation server, select the network adapter used to reach the network
installation server. You will then be able to change the network settings used to
reach the new server.
If you are installing over the network using a TSM virtual device and need to
access a different machine as your network install server, you should select the
tsmdev device entry and not the network adapter used to access that machine. For
more information on completing these menus for a TSM network install, please
refer “Bare Metal Recovery and System Reinstallation from a TSM Server” on
page 15-21 for detailed instructions.
To select a device, highlight the device and press Enter. If the device is a tape, CD,
or DVD drive, you can also deselect the device by repeating that action.
If you select a tape device, the Autoloader option is displayed. Press either n or y
to change this option to either “no” (default) or “yes.” If you change this option to
yes, the system will not prompt you to change volumes but will eject the tape
cartridge and wait for the autoloader to insert a new cartridge before continuing
automatically.
Press Esc to end and return to the Main Menu when you have finished your
selection.
Changing the Network Settings
If you selected a network adapter option, the following screen is displayed, based
on the network adapter type selected:
12-4 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide