Air Cleaner User Manual

2. The Select Physical Volumes for Volume Groups and Change Volume Group
Attributes options are not displayed if you have chosen only to recreate
specific logical volumes and filesystem from a backup.
3. The Advance Install Options menu is only displayed when this menu is
invoked by the system installation process.
Press Esc to return to the Main Menu if you are installing a system or to recreate
volume groups, logical volumes, or filesystems on an active system.
The following sections describe each option, as shown above, in detail.
Selecting Physical Volumes for Volume Groups
If you select the first option on the menu, a screen similar to the following is
displayed:
Each volume group and a list of physical volumes, if any, currently assigned to the
volume group are listed. From this screen, select the volume group for which to
change the physical volumes. A screen similar to the following is displayed:
+----------------------------------------------------------+
| Select Physical Volumes for Volume Groups |
+----------------------------------------------------------+
VG Name Option Physical Volume(s)
rootvg Create hdisk0
adsmvg Create hdisk5 hdisk6 hdisk7
sysbackvg Create hdisk1 hdisk2
+------------------------------------------------------------------------------+
| Select a volume group from the above list. |
| |
+------------------------------------------------------------------------------+
| Use ARROW or Tab keys to move and ENTER to select. Press ESC to cancel. |
+------------------------------------------------------------------------------+
Figure 11-2. The Select Physical Volumes for Volume Groups Menu
11-2 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide