Air Cleaner User Manual

The following is an explanation of each field:
Hostname of server
The server hostname if a server option was selected on the prior device
selector screen. You cannot change this field.
Device name
The device, if a tape drive or virtual device was selected. You cannot
change this field from this screen.
Disk image file
The name of the disk image file previously selected. This field is
displayed only if a disk image file name was selected. You cannot
change this field from this screen.
TSM Backup ID
This option will only be displayed when the Device or file name is a
TSM virtual device. The value for this field is propagated from a
previous input screen and may not be changed.
Restore data type
The type of data to be restored. This field is for information only and
cannot be changed.
Report Output type
Default=progress indicator. Keep the default value if you want to
display a progress indicator during the backup process, which indicates
the approximate total backup time and amount completed. Press Tab to
select “file list” to display a list of files as they are being backed up, or
Tab once more to show “only errors” that occur during the backup.
Restore Data from a Backup
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Hostname of server hambone
Disk image file /sysback.images/chukra>
TSM backup ID
Restore data type Filesystem
Report output type both +
Device name for remote volume prompt []
Allow restore of system data? no +
Allow restore of incremental backup? no +
Recreate VG,LV, or filesystem before restoring? no +
Restore non sparse files as non sparse (AIX 5.1 on no +
ly?)
Destination (if different) []
Exclude List File Name [] +/
File containing a list of data to be restored []
Data to restore (of above type) [/fixes]
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 10-5. Default Values When Restoring a File from a Filesystem Backup
10-10 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide