Air Cleaner User Manual

4. The fields on the above screen have the following meanings. You can change
the fields specified.
Hostname of client system
The hostname entered in the prior screen. You cannot change this field
from this screen.
If all: Hosts to deny access
Default=(blank/none). If you selected to add or change the record for
“all” hosts, enter a list of hosts, separated by spaces, that are to be
explicitly denied access. In other words, all hosts except those specified,
will be permitted. When you deny access to a specific host, all users on
that host are also denied access.
User name to allow
The user name entered in the prior screen. You cannot change this field
from this screen.
If all: Users to deny access
If you selected to add or change the record for “all” users, enter a list
of users, separated by spaces, that are to be explicitly denied access. In
other words, all users except those specified will have access.
If you selected to add or change the record for “all” hosts, the users
entered are denied from all hosts. Otherwise, the users entered are
denied only from the selected host.
Tape or Virtual Devices for backups or “all”
Default=(blank/none). If the specified user is allowed to back up to a
tape drive or virtual device, enter the device name or name, separated
by spaces. Press F4 to list the available tape and virtual devices on the
system and select one or more devices from the list using F7.
Only the devices entered here are displayed on the SMIT menus when
the selected host and user performs a backup to this server.
Directory path for backup images
Default=(blank/none). If you want to allow the specified user to
Add or Change Client Host Access to this Server
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Hostname of client system titanic
If all: Hosts to deny access [] +
* User name to allow all
If all: Users to deny access [] +
Tape or Virtual Devices for backups or "all" [] +
Directory path for backup images [] +
Directory path for network install images [] +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
Figure 8-4. The defaults When Configuring a Permission Record
8-6 IBM Tivoli Storage Manager for System Backup and Recovery: Installation and User’s Guide