User's Manual

3745 Panel Codes
Table 1-5 (Page 8 of 33). Panel Codes. An ñ following a panel code denotes that the code should 'Blink'.
Panel
Code
Definition
Action: Go to “3745 FRU Group
Table” on page 1-49
or to MAP number
135ñ
EIRV REGISTER IS NOT X'00' IN TEST 13 ECC COR-
RECTION TEST
Exchange the FRU group 16
136ñ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO ECC CORRECTION TEST
137ñ
ERROR ON A SELECTED SECTOR ECC COR-
RECTION TEST
138ñ
NO ERROR IN SSB WHILE EXPECTED ECC COR-
RECTION TEST
139ñ NO CORRECTION ECC CORRECTION TEST
Exchange the FRU group 16
13Añ NO DETECTION ECC CORRECTION TEST
13Cñ ERROR SSB BYTE 0 ECC CORRECTION TEST
13Dñ
ERROR SSB BYTE 1 AND 2 ECC CORRECTION
TEST
13Eñ
DIFFERENT WRITTEN AND READ CONTENTS IN
TEST 13
Exchange the FRU group 16
13Fñ
DISKETTE CHANGE INFORMATION IS NOT
PRESENT
Exchange the FRU group 18
140ñ
ADAPTER IN BUSY STATE IN TEST 5 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE DRIVES INITIALIZATION
DISKETTE
Exchange the FRU group 17
141ñ
IOIRV REGISTER IS X'00' IN TEST 5 NO INTER-
RUPT RECEIVED DRIVES INITIALIZATION DISKETTE
Exchange the FRU group 19
142ñ
EIRV REGISTER IS NOT X'00' IN TEST 5 DRIVES
INITIALIZATION DISKETTE
Exchange the FRU group 17
143ñ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO DRIVES INITIALIZATION
DISKETTE
Exchange the FRU group 19
144ñ
ADAPTER IN BUSY STATE IN TEST 6 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE SEEK COMMAND
BEFORE RECALIBRATE TEST DISKETTE
Exchange the FRU group 17
145ñ
IOIRV REGISTER IS X'00' IN TEST 6 NO INTER-
RUPT RECEIVED SEEK COMMAND BEFORE
RECALIBRATE TEST DISKETTE
Exchange the FRU group 19
146 Unused
Go to “MAP 3220: Undefined Panel
Message” on page 2-5
147ñ
ADAPTER IN BUSY STATE IN TEST 6 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE RECALIBRATE COMMAND
TEST DISKETTE
Exchange the FRU group 17
148ñ
IOIRV REGISTER IS X'00' IN TEST 6 NO INTER-
RUPT RECEIVED RECALIBRATE COMMAND TEST
DISKETTE
Exchange the FRU group 17
149ñ
EIRV REGISTER IS NOT X'00' IN TEST 6 RECALI-
BRATE COMMAND TEST DISKETTE
Exchange the FRU group 19
14Añ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO DRIVES INITIALIZATION
RECALIBRATE COMMAND TEST DISKETTE OR NO
DISKETTE (OR BAD DISKETTE) IN DRIVE
Exchange the FRU group 21
14Bñ
NO CYLINDER ZERO IN SSB BYTE0 BIT 7 RECALI-
BRATE COMMAND TEST2DRIVE DISKETTE
14Cñ
ERROR IN SSB BYTE 0 RECALIBRATE COMMAND
TEST DISKETTE
14Dñ
ERROR IN SSB BYTE 1 AND 2 RECALIBRATE
COMMAND TEST DISKETTE
14Eñ
ADAPTER IN BUSY STATE IN TEST 7 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE READ ID COMMAND TEST
DISKETTE
Exchange the FRU group 17
1-22 3745 Models 130 to 17A: MIP