User's Manual

3745 Panel Codes
Table 1-5 (Page 6 of 33). Panel Codes. An ñ following a panel code denotes that the code should 'Blink'.
Panel
Code
Definition
Action: Go to “3745 FRU Group
Table” on page 1-49
or to MAP number
0F7ñ
EIRV REGISTER IS NOT X'00' IN TEST 7 READ ID
COMMAND TEST
Exchange the FRU group 16
0F8ñ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO READ ID COMMAND
TEST
0F9ñ
ERROR ON HEAD ADDRESSING MECHANISM READ
ID COMMAND TEST
0FAñ ERROR IN SSB BYTE 0 READ ID COMMAND TEST
0FBñ
ERROR IN SSB BYTE 1 AND 2 READ ID COMMAND
TEST
Exchange the FRU group 16
0FCñ
ADAPTER IN BUSY STATE IN TEST 8 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE RECALIBRATE COMMAND
BEFORE SEEK TEST
0FDñ
IOIRV REGISTER IS X'00' IN TEST 8 NO INTER-
RUPT RECEIVED RECALIBRATE COMMAND
BEFORE SEEK TEST
0FE Unused
Go to “MAP 3220: Undefined Panel
Message” on page 2-5
0FFñ
ADAPTER IN BUSY STATE IN TEST 8 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE SEEK COMMAND TEST
Exchange the FRU group 16
100 Unused
Go to “MAP 3220: Undefined Panel
Message” on page 2-5
101
HARD DISK INITIAL STATE IS NOT OK. A
RECOVERY PROCEDURE IS RUNNING.
Exchange the FRU group 16
102
HARD DISK INITIAL STATE NOT OK (EVEN AFTER
A RECOVERY PROCEDURE).
103 to 110 Unused
Go to “MAP 3220: Undefined Panel
Message” on page 2-5
111ñ
IOIRV REGISTER IS X'00' IN TEST 8 NO INTER-
RUPT RECEIVED SEEK COMMAND TEST
Exchange the FRU group 16
112ñ
EIRV REGISTER IS NOT X'00' IN TEST 8 SEEK
COMMAND TEST
113ñ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO SEEK COMMAND TEST
114ñ
DIFFERENT HEAD NUMBERS SEEK COMMAND
TEST
115ñ ERROR IN SSB BYTE 0 SEEK COMMAND TEST
Exchange the FRU group 16
116ñ
ERROR IN SSB BYTE 1 AND 2 SEEK COMMAND
TEST
117ñ
ADAPTER IN BUSY STATE IN TEST 9 BSTAT BITS
0,1 ARE NOT B'00' OR ADAPTER NOT ENABLE
BSTAT BIT 6 IS NOT ONE READ/WRITE A SECTOR
COMMAND
118ñ
IOIRV REGISTER IS X'00' IN TEST 9 NO INTER-
RUPT RECEIVED READ/WRITE A SECTOR
COMMAND
119ñ
EIRV REGISTER IS NOT X'00' IN TEST 9
READ/WRITE A SECTOR COMMAND
Exchange the FRU group 16
11Añ
DATA TRANSMISSION ERROR HSTAT BITS
0,1,2,3,6,7 ARE NOT ZERO READ/WRITE A SECTOR
COMMAND
11Bñ
DIFFERENT WRITTEN AND READ SECTORS
READ/WRITE A SECTOR COMMAND
11Cñ
ERROR IN SSB BYTE 0 READ/WRITE A SECTOR
COMMAND
1-20 3745 Models 130 to 17A: MIP