Hub/Switch Installation Guide
Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 371
Release 4.5, Revision 2
To add a new specific configuration, select the PVL Server entry and click on the Type-specific...
button from the Configuration button group on the HPSS Servers window. The PVL Server
Configurationwindow willbedisplayed asshown inFigure6-32with defaultvalues. Ifthedefault
data is notdesired, changethe fields with the desired values. Click onthe Add button to create the
configuration entry.
To update an existingconfiguration, select thePVL Server entryon the HPSSServers window and
click on the Type-specific... button from the Configuration button group. The PVL Server
Configuration window will be displayed with the configured data. After modifying the
configuration, click on the Update button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the PVL Server entry on the HPSS Servers window and
click on the Type-specific... button from the Configuration button group. The PVL Server
Configuration window will be displayed with the configured data. Click on the Delete button to
delete the specific configuration entry.
Refertothe window’shelpfile formoreinformationon the individualfields andbuttonsaswell as
the supported operations available from the window.
Figure 6-32 PVL Server Configuration Window