Hub/Switch Installation Guide

Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 345
Release 4.5, Revision 2
6.8.8 Mover Specific Configuration
The Mover (MVR) specific configuration entry can be created using the Mover Configuration
window. Aftertheconfiguration entryis created,it canbeviewed, updated,or deletedthrough the
same window.
From the HPSSHealth and Status window (shownin Figure 6-1), clickon the Admin menu, select
the Configure HPSS option and click on the Servers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To adda new specific configuration, select the Moverentry andclick on the Type-specific... button
from the Configuration button group on the HPSS Servers window. The Mover Configuration
window will be displayed as shown in Figure 6-27 with default values. If the default data is not
desired, change the fields with the desired values. Click on the Add button to create the
configuration entry.
To updatean existingconfiguration, selectthe MoverentryontheHPSSServerswindowandclick
on the Type-specific... button from the Configuration button group. The Mover Configuration
windowwillbedisplayedwiththeconfigureddata.Aftermodifyingtheconfiguration,clickonthe
Update button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the Mover entry on the HPSS Servers window and click
on the Type-specific... button from the Configuration button group. The Mover Configuration
windowwillbedisplayedwiththeconfigureddata.ClickontheDeletebuttontodeletethespecific
configuration entry.
Refertothe window’shelpfile formoreinformationon the individualfields andbuttonsaswell as
the supported operations available from the window.