Manualshelf

Hub/Switch Installation Guide

ManualsBrandsIBM ManualsSwitchHub/Switch
341342343344345346347348349350
Chapter 6 HPSS Configuration
342 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
To adda newspecificconfiguration, selecttheMigration/PurgeServer entryandclick onthe Type-
specific... button from the Configuration button group on the HPSS Servers window. The
Migration/Purge Server Configuration window will be displayed as shown in Figure 6-26 with
default values. If thedefault datais not desired,change the fields with the desiredvalues. Click on
the Add button to create the configuration entry.
To update an existing configuration, select the Migration/Purge Server entry on the HPSS Servers
window and click on the Type-specific... button from the Configuration button group. The
Migration/Purge Server Configuration window will be displayed with the configured data. After
modifyingtheconfiguration,clickontheUpdate buttontowritethechangestotheappropriateSFS
file.
To delete an existing configuration, select the Migration/Purge Server entry on the HPSS Servers
window and click on the Type-specific... button from the Configuration button group. The
Migration/Purge Server Configuration window will be displayed with the configured data. Click
on the Delete button to delete the specific configuration entry.
Refertothe window’shelpfile formoreinformationon the individualfields andbuttonsaswell as
the supported operations available from the window.
Figure 6-26 Migration/Purge Server Configuration Window