Hub/Switch Installation Guide

Chapter 6 HPSS Configuration
332 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
Figure 6-22 Gatekeeper Server Configuration window
To use a Gatekeeper Server for Gatekeeping Services then the Gatekeeper Server must also be
configured into the Storage Subsystem (see Section 6.4: Storage Subsystems Configuration on page
259).
To usethe Gatekeeper Server for Account Validation Services,thenthe Account Validation button
ofthe AccountingPolicy mustbe ON(see Section6.6.3: ConfiguretheAccounting Policyon page289).
6.8.3.1 Gatekeeper Configuration Variables
Table 6-18: Gatekeeper Configuration Fields on page 332 lists the fields on the Gatekeeper Server
Configuration window and provides specific recommendations for configuring the GK for use by
HPSS.
Table 6-18 Gatekeeper Configuration Fields
Display
Field
Name
Description Acceptable Values Default Value
Server
Name
The descriptive name of the GK.
This name is copied from the GK
general configuration entry.
This field cannot be
modified. It is displayed
for reference only.
The selected GK
descriptive name.
Server ID The UUID of the GK. This ID is
copied over from the GK general
configuration entry.
This field cannot be
modified. It is displayed
for reference only.
Extracted from the
GK general
configuration
entry.