Hub/Switch Installation Guide

Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 329
Release 4.5, Revision 2
6.8.2 DMAP Gateway Specific Configuration
The DMAP Gateway specific configuration entry can be created using the DMAP Gateway
Configuration window. After the configuration entry is created, it can be viewed, updated, or
deleted through the same window.
From the HPSSHealth and Status window (shownin Figure 6-1), clickon the Admin menu, select
the Configure HPSS option and click on the Servers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To add a new specific configuration, select the DMAP Gateway entry and click on the Type-
specific... button from the Configuration button group on the HPSS Servers window. The DMAP
Gateway Configuration window will be displayed as shown in Figure 6-21 with default values. If
the default data is not desired, change the fields to the desired values. Click on the Add button to
create the configuration entry.
To updatean existingconfiguration,selectthe DMAPGatewayentry ontheHPSS Serverswindow
andclick ontheType-specific... buttonfromtheConfiguration buttongroup.The DMAPGateway
Configuration window will be displayed with the configured data. After modifying the
configuration, click on the Update button to write the changes to the appropriate SFS file.
To delete anexisting configuration, select the DMAP Gateway entry on the HPSS Servers window
andclick ontheType-specific... buttonfromtheConfiguration buttongroup.The DMAPGateway
Configuration window will be displayed with the configured data. Click on the Delete button to
delete the specific configuration entry.
Refertothe window’shelpfile formoreinformationon the individualfields andbuttonsaswell as
the supported operations available from the window.
SS Unlink Records The file name of the SFS
file where the information
representing storage
segments to be unlinked is
stored.
Valid Encina file name. /.:/encina/sfs/
hpss/
bfssunlink.#
COS Changes The file name of the SFS
file where the information
indicating which bitfiles
need to have the COS
changed is stored.
Valid Encina file name. /.:/encina/sfs/
hpss/
bfcoschange.#
Accounting Log The file name of the SFS
file where accounting log
records are stored.
Valid Encina file name. /.:/encina/sfs/
hpss/acctlog.#
Table 6-16 Bitfile Server Configuration Variables (Continued)
Display Field Name Description Acceptable Values
Default
Value